Jump to content

I have a cavalry hard drive duplicator which works on all the drives have in terms of cloning and then these drives are able to boot when plugged into 2 of my computers. However I can not clone my hard from my laptop as so. When I use macrium reflect to either clone or image a drive, it shows everything is fully loaded and partitioned identically but when trying to use them on both my computers, neither will boot. I've tried this we 3 different hard drives and am scratching my head. I am using the trial version and macrium support is very lacking.

Link to comment
https://linustechtips.com/topic/1498717-macrium-reflect-clone-wont-boot/
Share on other sites

Link to post
Share on other sites

Laptop drive may be installed as MBR, which would require CSM / Legacy mode to be enabled in the BIOS of the other machines.

F@H
Desktop: i9-13900K, ASUS Z790-E, 64GB DDR5-6000 CL36, RTX3080, 2TB MP600 Pro XT, 2TB SX8200Pro, 2x16TB Ironwolf RAID0, Corsair HX1200, Antec Vortex 360 AIO, Thermaltake Versa H25 TG, Samsung 4K curved 49" TV, 23" secondary, Mountain Everest Max

Mobile SFF rig: i9-9900K, Noctua NH-L9i, Asrock Z390 Phantom ITX-AC, 32GB, GTX1070, 2x1TB SX8200Pro RAID0, 2x5TB 2.5" HDD RAID0, Athena 500W Flex (Noctua fan), Custom 4.7l 3D printed case

 

Asus Zenbook UM325UA, Ryzen 7 5700u, 16GB, 1TB, OLED

 

GPD Win 2

Link to post
Share on other sites

30 minutes ago, Kilrah said:

Laptop drive may be installed as MBR, which would require CSM / Legacy mode to be enabled in the BIOS of the other machines.

I'll try that but I have also tried booting from a desktop clone as well and that doesn't work either.

It gets stuck saying verifying dmi...

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×