New components no post

[PhillyBoi]

Hey guys 

 

I bought today a new mobo cpu and gpu

 

asus Maximus hero xii apex

i9 11900k

3080TI

 

i took apart my old system, put in the new mobo plugged in my old ram which is compatible put in the CPU and plugged everything else. In every time I boot, I get a post code 00 and a red flashing light

The manual says it’s CPU related

 

I tried everything

I removed the GPU

I reseated the CPU

I reseated the RAM

I took everything apart and put it back together

I tried booting with one ram stick, then another and another

I tried to do everything to get a different error and I still get that error

I tried booting without the CPU installed to get CPU missing error still got the same post

I tried booting only with the 16 pin plugged in. Tried booting with only the necessary basic stuff plugged in without sata or m.2

I tried taking another PSU plugging the 16 pin from it to the mobo and leaving the rest on the other PSU  same thing

I tried flipping all the switches to on (safe mode, and all that) same thing

Took out the CMOS and put it back tried  replacing it

It’s been over 6 1/2 hours. I still can’t manage to fix it.

 

Maybe someone here can help?

I thought maybe it’s a CPU fan issue (I have an  AIO)

I only have one cable for the pump. I tried every slot available

All the fans are and were plugged into the fan hub/rgb hub

 

 

It’s the same config that I had with my old motherboard, GPU and CPU

 

If it helps, there are a total of six LEDs in a row on the motherboard it’s the far left one that’s blinking red

 

In the manual, it said either CPU issue or condensation detected. I have no idea how to continue.

 

 

Edit: 

 

I took the motherboard out unplugged everything and I mean everything left only 24 pin and the 28 pins plugged in with the ram of course still the same  tries to post for couple seconds then shuts down.

I took ram out from two other pcs tried, the sticks doesn’t work

I honestly thought my old PSU wasn’t compatible or died somehow so I bought another PSU today and with the new one it does the same. 
I added  videos  so you can see what happens now

Something I have noticed when I switch to bios1 the system won’t turn on at all no response even when I try to jump it, and the issue happens on bios2 

Flashing the bios

 

 

doesn’t help

Edited November 22, 2022 by PhillyBoi

[Skiiwee29]

You likely need to do a BIOS update. That board has a BIOS flashback

[GOTSpectrum]

5 minutes ago, PhillyBoi said:

I tried booting only with the 16 pin plugged in.

I'm not sure what you mean by 16 pin. 

 

Does the motherboard need any BIOS updates possibly? 

 

Can you get your hands on another board or CPU so you can rule them out? 

[PhillyBoi]

18 minutes ago, GOTSpectrum said:

I'm not sure what you mean by 16 pin. 

 

Does the motherboard need any BIOS updates possibly? 

 

Can you get your hands on another board or CPU so you can rule them out? 

My mistake I meant 24 pin

[PhillyBoi]

19 minutes ago, Skiiwee29 said:

You likely need to do a BIOS update. That board has a BIOS flashback

You were right, I did it seems to be booting

thank you very much!

[PhillyBoi]

37 minutes ago, Skiiwee29 said:

You likely need to do a BIOS update. That board has a BIOS flashback

Weird thing is that after it did the update it turned on and off a few time (passing post) and then turned off and now can’t turn it on again 

[Skiiwee29]

2 minutes ago, PhillyBoi said:

Weird thing is that after it did the update it turned on and off a few time (passing post) and then turned off and now can’t turn it on again 

What does the Qcode read? Have you tried shutting it down, toggle the power supply and then try booting?

[PhillyBoi]

Just now, Skiiwee29 said:

What does the Qcode read? Have you tried shutting it down, toggle the power supply and then try booting?

Yup tried it.

tried resetting the cmos too

 

qocde shows nothing now it just won’t turn on at all, all the leds are on but doesn’t respond to the power button or start button on the mobo 

 

[SimplyGone]

50 minutes ago, PhillyBoi said:

asus Maximus hero xii apex

Is this a Z490 board?  If so you'll definitely need the BIOS update.  Try reflashing the very latest BIOS on to the board with the Flashback button again

[PhillyBoi]

2 minutes ago, SimplyChunk said:

Is this a Z490 board?  If so you'll definitely need the BIOS update.  Try reflashing the very latest BIOS on to the board with the Flashback button again

But that’s what I did, 

now it’s just stuck on this boot loop, 

maybe it’s still the bios update? 

[SimplyGone]

Why'd you pick the Apex man?

[PhillyBoi]

1 minute ago, SimplyChunk said:

Why'd you pick the Apex man?

That’s the only option I had tbh

[SimplyGone]

1 minute ago, PhillyBoi said:

That’s the only option I had tbh

your only option was a $700 extreme overclocking board??

[PhillyBoi]

3 minutes ago, SimplyChunk said:

your only option was a $700 extreme overclocking board??

Tbh, I went for what seemed the best from the stock they had + the one I could get my hands on the quickest 

 

this was the winner 

[PhillyBoi]

9 minutes ago, PhillyBoi said:

But that’s what I did, 

now it’s just stuck on this boot loop, 

maybe it’s still the bios update? 

Maybe it’s a psu issue now? Not enough power?

 

tired removed the 3080 ti and the same thing happened 

[Skiiwee29]

1 minute ago, PhillyBoi said:

Tbh, I went for what seemed the best from the stock they had + the one I could get my hands on the quickest 

 

this was the winner 

Not uncommon for Asus boards to boot loop for 3-5 minutes and several times as it trains memory. Its possible this is whats happening. Just have some patience and let it be for up to 10 minutes. If still no post after that, then try reflashing the BIOS again.

[PhillyBoi]

3 hours ago, Skiiwee29 said:

Not uncommon for Asus boards to boot loop for 3-5 minutes and several times as it trains memory. Its possible this is whats happening. Just have some patience and let it be for up to 10 minutes. If still no post after that, then try reflashing the BIOS again.

It’s been a few hours and the same thing 

[PhillyBoi]

New development

i took everything apart and tried turning the mobo on like this

 

 

this is the result