aw2518h Monitor Yellowish tint problem

[styxhelix]

I have this problem with my monitor. I haven't used my monitor for almost like 6 months because the mainboard got damaged and the monitor wont turn on.
I fixed it by replacing the main board but the problem is the monitor is yellowish after I turned it on. I tried setting up the RGB in my control panel, playing with the settings on the OSD and still wont solve it. Its like I'm viewing it on a side angle. I'm really confused if the problem is the LCD or the Board that I bought. Can someone please give me any advise for this?

 

[dogwitch]

can you post model of display?

also are you using the same cable. when you where using og damage mobo?

[Needfuldoer]

Almost looks like it has backlight strips on the top and bottom, but the top ones aren't working.

 

Try unplugging the monitor from power for at least 30 seconds.

[styxhelix]

7 hours ago, dogwitch said:

can you post model of display?

also are you using the same cable. when you where using og damage mobo?

do you mean the monitor? Its aw2518h Alienware Monitor.
I tried using both old and new cables of the PCB Board but still the same problem.

 

 

 

6 hours ago, Needfuldoer said:

Almost looks like it has backlight strips on the top and bottom, but the top ones aren't working.

 

Try unplugging the monitor from power for at least 30 seconds.

already tried it still no luck. so the problem is the Back light? and not the new PCB board? the display was okay before the PCB board got damaged.

[styxhelix]

21 hours ago, dogwitch said:

can you post model of display?

also are you using the same cable. when you where using og damage mobo?

The display panel model is M250HTN01.7 which can only be bought on china and the shipping cost is way too expensive.