RAM and XMP Problem

[Grumpa]

Been reading posts on here about others with similar problems and they getting specific help with their systems so I am hoping that someone can help me set my RAM properly to get better speeds.

 

CPU is a Intel i7-10700 @ 2.9Ghz

Motherboard is a ROG Strix Z490-E Gaming

GPU is a Nvidia Geforce RTX 2060 Super

Memory is 2 sets of (32gb total) Corsair Vengeance RGB PRO 16GB (2x8GB) DDR4 3200MHz C16 LED Desktop Memory ( its is only running at 2133MHz) 

 

XMP is off because when i turn it on my PC is ok for like a few minutes then starts crashing. 

I want to get closer to the 3200 instead of the 2133 MHz i am currently getting.

 

my PC and My 50 year old fart brain thanks you   LOL 

[Somerandomtechyboi]

Check thaiphoon burner for ics, most likely mix and match gone wrong

[RONOTHAN##]

Pull out the RAM and take a look at the stickers on each of the DIMMs. On the DIMMs, there will be a version number, it'll say something like V3.31, v4.32, v4.24, etc. Check to make sure that the version numbers are consistent across all DIMMs, if they aren't that can be your issue. Also report back with what version number they all are. 

[Grumpa]

20 minutes ago, RONOTHAN## said:

Pull out the RAM and take a look at the stickers on each of the DIMMs. On the DIMMs, there will be a version number, it'll say something like V3.31, v4.32, v4.24, etc. Check to make sure that the version numbers are consistent across all DIMMs, if they aren't that can be your issue. Also report back with what version number they all are. 

Slot 1 is 4.32

Slot 2 is 5.22

Slot 3 is 4.32

Slot 4 is 5.22

[Somerandomtechyboi]

3 minutes ago, Grumpa said:

Slot 1 is 4.32

Slot 2 is 5.22

Slot 3 is 4.32

Slot 4 is 5.22

Mix and match gone wrong

 

Sell both kits and buy a 32gb kit or buy bare pcb 2133-2666 all with matching ics (can request ic) and lazy oc to 3200 16-18-18 (auto everything other than that)

[Grumpa]

1 minute ago, Somerandomtechyboi said:

Mix and match gone wrong

 

Sell both kits and buy a 32gb kit or buy bare pcb 2133-2666 all with matching ics (can request ic) and lazy oc to 3200 16-18-18 (auto everything other than that)

ok thank You

[Vidhyut]

I have  a HyperX HX430C16FB4/16 is a 2G x 64-bit (16GB) DDR4-3000 CL16 SDRAM (Synchronous DRAM) 1Rx8, I am using it at XMP Profile #1: DDR4-3000 CL16-19-19 @1.35V  I want to add another Ram but they stopped manufacturing it.  The one available is FURY KF432C16BB/16 is a 2G x 64-bit (16GB) DDR4-3200 CL16,SDRAM (Synchronous DRAM) 1Rx8, it has  XMP Profile #2: DDR4-3000 CL16-19-19 @ 1.35V

Can I use them together at 3000mhz? I have a MSI B450M pro-vdh max motherboard.