ARGB Issue

[Lorionlol]

Hello guys,

 

I just bought a new case for a better airflow. It's the Lian Li Lancool-215. I have a ASRock B550M-ITX/ac mobo. 

 

So... the case has a basic controller for the RGB on the two front fans and the Lianli logo but the issue is that they are not recognized.

 

I plugged the controller to the right header according to the board manual, it's a 3-pin cord. The fans are working, light is on, but i can't control it. I have no idea what i did wrong or what i'm missing. I tried unplugging it and redo it again, but nothing changed.

 

It's my first "RGB" components so i'm kinda lost  here.

 

I know i can't control the fan speed, which is fine by me, i just need to know if i can modify the colors. 

 

Thanks a lot for your help ! 

[YoungBlade]

Not all motherboards have controls for the RGB built in. You may need to use a third party utility from the manufacturer to get control.

 

Here's a link to ASRock's Polychrome utility: https://download.asrock.com/Utility/RGB/PolychromeRGB(v2.0.109).zip

[Lorionlol]

3 minutes ago, YoungBlade said:

Not all motherboards have controls for the RGB built in. You may need to use a third party utility from the manufacturer to get control.

 

Here's a link to ASRock's Polychrome utility: https://download.asrock.com/Utility/RGB/PolychromeRGB(v2.0.109).zip

Hello !

 

Downloaded it and still nothing. It recognize the pins, but not the fans. I mean, nothing is happening when i change the setup. 

[YoungBlade]

12 minutes ago, Lorionlol said:

Hello !

 

Downloaded it and still nothing. It recognize the pins, but not the fans. I mean, nothing is happening when i change the setup. 

Can you post some pictures and screenshots of what you're seeing? A picture of the connection on the motherboard and also a screenshot of the Polychrome utility?

 

You plugged the 3 pin ARGB plug into this header, yes?

[Lorionlol]

This is the 3 pin and where i plugged it and the polychrome utility also.

 

Thanks for your help !