Computer Freezing no bluescreen /error message

[Cheki]

Recently I built a new system, specs below:
- 5800x

- 3080 tuf oc v2
- 32gb 3600mhz Ram

- Asus strix b550-f 
- 850w msi gold psu
- Windows 10 home x64
Sometimes all apps on windows become unresponsive and freeze, there is no crash, and no error message from either event viewer (or a windows bluescreen) 
Video of what happens > https://imgur.com/a/2YMKO9O
I was wondering if anyone has come across this before? or has any ideas on how I can fix this / what Is causing this, since I'm now at the point where I'm completely clueless as to how I can fix this

*edit*

Ram - Corsair Vengeance RGB pro - 8x4 same model

Storage - M.2 970 EVO Plus 2tb (gen 3 pcie, in the gen 4 compatible slot on mobo)
Bios should be up to date, when checking software for mobo, it says that it is all up to date

*edit again*
When this occurs, taking out the display port cable from the gpu, and putting it back in leads to no signal being output 

[--SID--]

Brand and model RAM?

 

Motherboard BIOS up to date?

[Cheki]

5 minutes ago, --SID-- said:

Brand and model RAM?

 

Motherboard BIOS up to date?

Updated post, bios is up to date, ram corsaid vengeance rgb pro

[--SID--]

57 minutes ago, Cheki said:

corsaid vengeance rgb pro

Exact model? It's something like CMW32GX4M2E3200C16

And there's a version number written on the sticks, next to the voltage. What's the number?

[Cheki]

45 minutes ago, --SID-- said:

Exact model? It's something like CMW32GX4M2E3200C16

And there's a version number written on the sticks, next to the voltage. What's the number?

MODEL : CMW16X4M2Z3600C18 version 3.30

I assume that you believe it's a RAM issue?
*edit* forgot to say on main post but amended now, but it's 8x4, so it's not in wrong slots or anything

 

[Cheki]

On 12/5/2021 at 5:35 PM, --SID-- said:

Brand and model RAM?

 

Motherboard BIOS up to date?

Checked earlier, found I was running an old bios, updated it to most recent with a flash but still leads to crashing

 

[--SID--]

On 12/5/2021 at 8:17 PM, Cheki said:

CMW16X4M2Z3600C18 version 3.30

With a Z in the modelnumber is Ryzen optimized. That's good.

 

You bought two separate kits. Both are version 3.30?

 

Test with just 1 kit in slot A2 and B2.

[Cheki]

On 12/6/2021 at 9:06 PM, --SID-- said:

With a Z in the modelnumber is Ryzen optimized. That's good.

 

You bought two separate kits. Both are version 3.30?

 

Test with just 1 kit in slot A2 and B2.

I won't try this just yet, since by pure luck I discovered that the chipset drivers weren't installed correctly, so I'll be testing that before taking out one of the pairs

[Cheki]

On 12/6/2021 at 9:06 PM, --SID-- said:

With a Z in the modelnumber is Ryzen optimized. That's good.

 

You bought two separate kits. Both are version 3.30?

 

Test with just 1 kit in slot A2 and B2.

I've noticed that the crashing doesn't seem to occur when I have d.o.c.p (xmp) disabled, any ideas?