5600xt still crashing

[experiencednoob]

I fixed my gpu crashing issues by underclocking it in msi afterburner but it came back for me again.

according to reliability history:

 

A problem with your hardware caused Windows to stop working correctly.

Problem signature
Problem Event Name:    LiveKernelEvent
Code:    141
Parameter 1:    ffffe40b7538d460
Parameter 2:    fffff8005d86dac0
Parameter 3:    0
Parameter 4:    22cc
OS version:    10_0_19042
Service Pack:    0_0
Product:    256_1
OS Version:    10.0.19042.2.0.0.256.48
Locale ID:    13321

Extra information about the problem
Bucket ID:    LKD_0x141_Tdr:6_IMAGE_amdkmdag.sys
Server information:    d97c3b5a-7185-4bf1-aac1-0a7718526a41

 

heres from event viewer:

 

Device PCI\VEN_1002&DEV_731F&SUBSYS_E4111DA2&REV_CA\6&12d3302e&0&00000019 had a problem starting.

Driver Name: oem12.inf
Class Guid: {4d36e968-e325-11ce-bfc1-08002be10318}
Service: amdkmdag
Lower Filters: 
Upper Filters: 
Problem: 0x0
Problem Status: 0xC00000E5

 

Also my gpu driver is from 03-10-21 withoutt the software since it was the stable one i got

 

ram is hyperx 3200 and is on qvls list, bios mobo is updated to latest. Also pcie cable is a daisy chain.

 

I can't rma right now because of school so any help other than suggesting me to rma it would be appreciated

 

Thank you.

 

 

 

 

 

 

[evilcloud]

what about psu?  You got enough grunt to power it?

 

[experiencednoob]

Just now, evilcloud said:

what about psu?  You got enough grunt to power it?

 

its a corsair cx650m i think???

[evilcloud]

psu should be ok.

 

just came across this - https://community.amd.com/t5/drivers-software/bsod-amdkmdag-sys/td-p/453866 are you running afterburner?  Might be an idea to uninstall it, see if it fixes the issue

[experiencednoob]

2 minutes ago, evilcloud said:

psu should be ok.

 

just came across this - https://community.amd.com/t5/drivers-software/bsod-amdkmdag-sys/td-p/453866 are you running afterburner?  Might be an idea to uninstall it, see if it fixes the issue

when i dont run afterburner i see flcikering in my screen like tv noise?? 

I feel like my card is ocing too much for some reason.

[BetteBalterZen]

If you have to undervolt your graphics card to make it stable (not crashing), then - IMO - there's a problem with the card itself on a hardware level. I would RMA. 

Maybe just try to undervolt it even futher. How far have you undervolted it currently?

[evilcloud]

try uninstalling any overclocking software and remove any kind of overclocking and underclocking you may have in the bios - revert to defaults, see if if you get any problems, then take it from there.

[experiencednoob]

10 minutes ago, BetteBalterZen said:

If you have to undervolt your graphics card to make it stable (not crashing), then - IMO - there's a problem with the card itself on a hardware level. I would RMA. 

Maybe just try to undervolt it even futher. How far have you undervolted it currently?

so far core clock is capped to 1600mhz

 

I dont really want to rma yet because I cant use my pc for school...

[experiencednoob]

10 minutes ago, evilcloud said:

try uninstalling any overclocking software and remove any kind of overclocking and underclocking you may have in the bios - revert to defaults, see if if you get any problems, then take it from there.

how to check if theres any kind of over/under clocking in my bios, but so far the one thing I did was enable xmp only

[BetteBalterZen]

Just now, experiencednoob said:

so far core clock is capped to 1600mhz

 

I dont really want to rma yet because I cant use my pc for school...

It's a shitty situation for sure man, I'm sorry. 

Does the "TV noise" disappear if you undervolt it further? 

[evilcloud]

whats the mobo?  

[BetteBalterZen]

1 minute ago, experiencednoob said:

how to check if theres any kind of over/under clocking in my bios, but so far the one thing I did was enable xmp only

XMP only? Intel chip? iGPU? 

Is the 5600XT important for a specific program? 

[experiencednoob]

Just now, BetteBalterZen said:

It's a shitty situation for sure man, I'm sorry. 

Does the "TV noise" disappear if you undervolt it further? 

Thank you for the consolation , I appreciate it.

 

The tv noise disappeared when I truned on the msi afterburner.

[experiencednoob]

1 minute ago, evilcloud said:

whats the mobo?  

its a b550m mortar wifi

[BetteBalterZen]

Just now, experiencednoob said:

Thank you for the consolation , I appreciate it.

 

The tv noise disappeared when I truned on the msi afterburner.

Just to be exact, is it when you apply the undervolt profile, that the noise goes away?

[experiencednoob]

1 minute ago, BetteBalterZen said:

XMP only? Intel chip? iGPU? 

Is the 5600XT important for a specific program? 

i have 5600x amd cpu

 

No, its just my gpu I don't mine.

[experiencednoob]

Just now, BetteBalterZen said:

Just to be exact, is it when you apply the undervolt profile, that the noise goes away?

yes

[BetteBalterZen]

1 minute ago, experiencednoob said:

i have 5600x amd cpu

 

No, its just my gpu I don't mine.

Ah right, no iGPU then. 

Well, you can't use your PC without the GPU anyways so yeah RMA'ing would make your PC unusable. 

[BetteBalterZen]

2 minutes ago, experiencednoob said:

yes

Have you only tweaked the voltage curve or have you also underclocked the memory?

[experiencednoob]

16 minutes ago, BetteBalterZen said:

Have you only tweaked the voltage curve or have you also underclocked the memory?

just directly inputted 1600

[BetteBalterZen]

5 minutes ago, experiencednoob said:

just directly inputted 1600

What happens if you reset the Core Clock and then after turning down the Memory Clock? Does the noise go away?

[experiencednoob]

8 minutes ago, BetteBalterZen said:

What happens if you reset the Core Clock and then after turning down the Memory Clock? Does the noise go away?

if i reset core clock the noise returns and i cant change the memoryclock

[BetteBalterZen]

3 minutes ago, experiencednoob said:

if i reset core clock the noise returns and i cant change the memoryclock

Oh okay, fair enough... 

Maybe try to tweak the voltage curve - a proper undervolt. Maybe it will give you a better result than setting a 1600MHz Core Clock. 

[experiencednoob]

30 minutes ago, BetteBalterZen said:

Oh okay, fair enough... 

Maybe try to tweak the voltage curve - a proper undervolt. Maybe it will give you a better result than inputting 1600MHz Core Clock. 

will try

 

[experiencednoob]

17 hours ago, BetteBalterZen said:

Oh okay, fair enough... 

Maybe try to tweak the voltage curve - a proper undervolt. Maybe it will give you a better result than setting a 1600MHz Core Clock. 

yeah i dont know the curve editor only has like 3 points to move and also I recently tried updating the driver to 21.9.1 didn't work and tried to msi afterburner an dit worked for a couple of seconds then crashed. Now i just installed the driver directly w/o the software and underclock it in msi again

 

even viewer shows:

Device PCI\VEN_1002&DEV_731F&SUBSYS_E4111DA2&REV_CA\6&12d3302e&0&00000019 had a problem starting.

Driver Name: oem12.inf
Class Guid: {4d36e968-e325-11ce-bfc1-08002be10318}
Service: amdwddmg
Lower Filters: 
Upper Filters: 
Problem: 0x0
Problem Status: 0xC00000E5

 

reliability history:

A problem with your hardware caused Windows to stop working correctly.

Problem signature
Problem Event Name:    LiveKernelEvent
Code:    141
Parameter 1:    ffffb4083113b460
Parameter 2:    fffff8018e56dac0
Parameter 3:    0
Parameter 4:    5344
OS version:    10_0_19042
Service Pack:    0_0
Product:    256_1
OS Version:    10.0.19042.2.0.0.256.48
Locale ID:    13321

Extra information about the problem
Bucket ID:    LKD_0x141_Tdr:6_IMAGE_amdkmdag.sys
Server information:    a44725de-2675-4a21-8bae-d8923314430d