2 AIO's on my motherboard

[Mirano]

hey guys,

 

i have the following hardware: ASRock H470M-ITX/ac with a NZXT Kraken M22 for my CPU.

i Also have 2 FANS running in my system which  are on chassis fan 1

 

Now i want to use the following: 

NZXT Kraken M22 with a  NZXT Kraken G12 Wit to AIO my GPU, can i even do this with the current MB?   My idea:   Use the orange header for my GPU AIO FAN, and maybe split the WP one?   I hope you guys got any idea!

[Mirano]

Just a note, i dont care about the lightning, as it wont be visible anyway

[Mirano]

3 minutes ago, Mirano said:

Just a note, i dont care about the lightning, as it wont be visible anyway

De G12 ondersteunt de volgende koelers:
• NZXT
Kraken Z73, Z63, X73, X63, X53, X72, X62, X52, X42, X61, X41, X31, X60, X40

• Corsair
H105, H110, H90, H75 (CW-9060015-WW only), H55, H50 (CW-906006-WW only)

• Thermaltake
Water 3.0 Riing RGB 360, 280, 240, Red 280, 140,
Water 3.0 Ultimate, Extreme S, Extreme, Pro, Performer
Water 2.0 Extreme, Pro, Performer

• Antec
KUHLER H2O 920V4, 620V4, 920, 620

• Zalman
LQ-320, LQ-315, LQ-310

 

These are the models that are supported, i don't mind another model. it has to be 120mm

[SavageNeo]

yes you can. just plug the other aio's pump to cpu fan.

 

so now your aio's pumps are in "aio pump" adn "cpu_fan"

[Mirano]

10 hours ago, SavageNeo said:

yes you can. just plug the other aio's pump to cpu fan.

 

so now your aio's pumps are in "aio pump" adn "cpu_fan"

so i split the Chas fan header for the 2 AIO fans and 1 pump connector in CPU fan and 1 in WP. Do i need to change bios settings?

[NorKris]

one MB fan header can take 3 fans each. (more if they are noctua or arctic) 

one MB fan header can take 1 aio pump each. 

 

if you need to change anything in bios or ur MB's fan software depends on the header ur connectin.  2 pin? 3? 4?

[Mirano]

5 minutes ago, NorKris said:

one MB fan header can take 3 fans each. (more if they are noctua or arctic) 

one MB fan header can take 1 aio pump each. 

 

if you need to change anything in bios or ur MB's fan software depends on the header ur connectin.  2 pin? 3? 4?

ohh okay,

 

That's clear, i'll just use 1 cpu header for 1 pump, and 1 for the other.

 

About the USB 2 header that's connected to my MB. Is that for controlling the software?

 

[NorKris]

yes if ur using nzxt's Cam (good luck) you need to use the usb headers to each of the pumps.