BIOS settings will not apply

[Offwhite1666]

At the title states I cant get any of my BIOS settings to apply. I just want to go to 4.9ghz OC and enable 3200 ram profile, everytime I do and hit save and exit it never applies. I have reset cmos, updated BIOS, and tried just doing 1 setting at a time but can't even get ram profile to load. Please help me understand if im doing something wrong lol, to note I have done this before on my last PC with no issues. I have looked up everything and followed every tutorial to no avail.

 

Specs:

Gigabyte Z390 UD 1.1 

MSI Ventus 2x OC 3060ti

Intel i7-9700k

Delta Force 3200mhz 8 x 2

Western Digital SN750 500GB nvme SSD

EVGA 650W 80+ Gold PSU

Masterliquid 120ml CPU cooler

 

[Skiiwee29]

Welcome to Gigabyte, the worst BIOS in the motherboard space. This is, sadly, common with Gigabyte boards in my experience. Only way to get around it was to manually set everything. 

[Offwhite1666]

1 minute ago, Skiiwee29 said:

Welcome to Gigabyte, the worst BIOS in the motherboard space. This is, sadly, common with Gigabyte boards in my experience. Only way to get around it was to manually set everything. 

I unfortunately realized this afyer buying  but as far as performance it does it job. What do you mean only way around is to manually set it all? I have tried to manually set lots of BIOS settings, as far as I know there is no way to OC or enable ram from a program.

[Skiiwee29]

Just now, Offwhite1666 said:

I unfortunately realized this afyer buying  but as far as performance it does it job. What do you mean only way around is to manually set it all? I have tried to manually set lots of BIOS settings, as far as I know there is no way to OC or enable ram from a program.

Set one thing, save it, reboot. Set the next.. save it.. reboot... I had to manually set the RAM speed, timings, voltages etc on my old Gigabyte board otherwise it would just do the samething and ever apply. 

[Offwhite1666]

1 minute ago, Skiiwee29 said:

Set one thing, save it, reboot. Set the next.. save it.. reboot... I had to manually set the RAM speed, timings, voltages etc on my old Gigabyte board otherwise it would just do the samething and ever apply. 

Damn lol, appreciate the help, I have tried just doing a cpu oc, a ram profile, and some turbo settings all indivually and rebooting after to see that nothing changed. This is why Im so frusrated because even 1 by 1 it wont change lol