CPU EZ debug light

[Kensworth]

Hello

I was transferring my pc from an old case to a new case. After I hooked everything up and I turned it on the ez debug light for the cpu lit up. I tried a few things. I unplugged and replugged the cpu cables and nothing changed. I unplugged the cpu power cable and started it up and the light next to the CPU socket on the mother board lit up along with the debug light. I then plugged everything back in and took off the cooler and took out the cpu to check for bent pins which I didn’t see any, I then reset the cpu and turned it on without the cooler for a few seconds and the debug light stayed on. Idk what happened and what’s broken. Please help

[Guest]

Try and clear the cmos. 

 

[Kensworth]

53 minutes ago, ShrimpBrime said:

Try and clear the cmos. 

 

I tried and it didn’t work. I took the battery too.

[Guest]

2 hours ago, Kensworth said:

I tried and it didn’t work. I took the battery too.

Well you could try and re-install the cpu. Maybe there's a pin not making good contact.