Jump to content

I guess I might have been dumb by setting the memory higher than 3600 which is what it says it is and also setting the fclk to 1900 , it was 1800 before and everything worked fine.. now it wont even boot to bios. The pc itself turns on but not the mouse , keyboard or monitors..

 

I got an asus prime B550 PLUS mobo

16gb 3600mhz cl 18 (2x8)

Ryzen 5 3600x

And a gtx 1080

Anyone know what to do? 

Im really scared I ruined something I just built this pc less than a week ago..

Link to comment
https://linustechtips.com/topic/1251432-my-pc-wont-boot/
Share on other sites

Link to post
Share on other sites

Reseat CMOS battery located as show in the picture, take it out for 30 seconds and then put it back in

1160729_2.png

Reminder⚠️

I'm just speaking from experience so what I say may not work 100%

Please try searching up the answer before you post here but I am always glad to help

Link to comment
https://linustechtips.com/topic/1251432-my-pc-wont-boot/#findComment-14061000
Share on other sites

Link to post
Share on other sites

Just now, Nethanel said:

Am I supposed to do it while the pc is off? If so after turning it back on it didnt do anything

Yes you never do anything to your PC internals when on, try starting with 1 ram stick

Reminder⚠️

I'm just speaking from experience so what I say may not work 100%

Please try searching up the answer before you post here but I am always glad to help

Link to comment
https://linustechtips.com/topic/1251432-my-pc-wont-boot/#findComment-14061030
Share on other sites

Link to post
Share on other sites

3 minutes ago, Kanna said:

Yes you never do anything to your PC internals when on, try starting with 1 ram stick

Doesnt work I tried booting with each of the 2 by its own..

If it helps theres a light on the mobo 

Starts with DRAM this one does light

But after that the CPU should light but it doesnt

Link to comment
https://linustechtips.com/topic/1251432-my-pc-wont-boot/#findComment-14061049
Share on other sites

Link to post
Share on other sites

31 minutes ago, Nethanel said:

Doesnt work I tried booting with each of the 2 by its own..

If it helps theres a light on the mobo 

Starts with DRAM this one does light

But after that the CPU should light but it doesnt

My bad.. After reading the manual it says if one lights up thats the problem so it appears the DRAM is causing the issue..

Link to comment
https://linustechtips.com/topic/1251432-my-pc-wont-boot/#findComment-14061148
Share on other sites

Link to post
Share on other sites

1 hour ago, Nethanel said:

My bad.. After reading the manual it says if one lights up thats the problem so it appears the DRAM is causing the issue..

you might have caused problems with the ram if you put too much voltage thru it or something also it is most likely not covered by warranty

Reminder⚠️

I'm just speaking from experience so what I say may not work 100%

Please try searching up the answer before you post here but I am always glad to help

Link to comment
https://linustechtips.com/topic/1251432-my-pc-wont-boot/#findComment-14061453
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×