x570 aorus master problems

[tsk_force]

Hi guys

 

 

 

I'm writing from Italy, I need your help to squeeze my build a little:

 

 

i have:

 

x570 aorus master

2x8 gb gskill 4266 cl19

ryzen 7 3700x

nvidia 1070 by evga

 

 

 

 

I set my ram as you see in the picture but I have a problem: the memtest lasted about 40 minutes did not reveal any errors but some times the pc does not turn on, goes into bootloop and after resetting the bios (it does it by itself after 2-3 boot attempts)  it starts all over but resetting the bios in its entirety  

 

 

 

 

have any of you had such problems with these motherboards? the bios I have now is F11, the latest available on the site

 

 

[Haro]

Try updating the bios  if it's a ram problem 

Try with one stick at a time 

[narrdarr]

I notice the calculator is for 3733mhz.

Is your ram decoupled from from the fabric?

[tsk_force]

39 minutes ago, TofuHaroto said:

Try updating the bios  if it's a ram problem 

Try with one stick at a time 

even if they were RAM, why don't I have any problems in the game or during normal use and not even a report on memtest? but only problems at startup? then in your opinion for those ram (4266 cl19 1.4v) the latencies calculated by dram calculator can already give instability?

 

ps: the bios is the last on aorus website

 

 

28 minutes ago, narrdarr said:

I notice the calculator is for 3733mhz.

Is your ram decoupled from from the fabric?

 

i put 3733 because it is the result that I wanted to get to have it the same with the infinity fabric,I bought these rams thinking I could bring them to lower frequency (everyone says the best on ryzen is 3733) but with better latencies am I wrong?

 

I noticed one thing:

 

cinebench r20 totaly stock (not even activated xmp profile) 4590

Cinebench r20 with ram at 3733 with the frequencies on the screen 4953

cinebench r20 with ram in xmp 4994

 

 

 

 

[Haro]

2 minutes ago, tsk_force said:

even if they were RAM, why don't I have any problems in the game or during normal use and not even a report on memtest? but only problems at startup? then in your opinion for those ram (4266 cl19 1.4v) the latencies calculated by dram calculator can already give instability?

 

Well it could be not stable in situations like boot ups were the ram probably has to do the most job and that brings the best out of it 

It could be the imc 

[tsk_force]

4 minutes ago, TofuHaroto said:

Well it could be not stable in situations like boot ups were the ram probably has to do the most job and that brings the best out of it 

It could be the imc 

IMC? How can i fix It?

[Haro]

4 minutes ago, tsk_force said:

IMC? How can i fix It?

Try booting to the bios 

Set the soc voltage to 1.1 

And check if that helps 

If you have ant overclock on your cpu get rid of it 

It could be the Interconnect acting up

[tsk_force]

Just now, TofuHaroto said:

Try booting to the bios 

Set the soc voltage to 1.1 

And check if that helps 

If you have ant overclock on your cpu get rid of it 

It could be the Interconnect acting up

the cpu is stock, i have not even installed amd overdrive, i would like to make the memories part stable at 101% otherwise i am going crazy to understand where the crashes come from 

the values pulled out by dram calculator how do you see them? can they go or is there something to correct? I have very little experience with amd and ryzen