Please identify this connector?

[vcSjJ5jU80]

Hi, I'm building an eGPU using a RAZER Core V2 board bought from AliExpress. I hope someone can identify a connector on it for me?

 

It is the connector which runs from the main board to the LED board. 10 pins in 1 row, and I guess it would be a ribbon cable connecting them. Photos attached.

 

The reason for this is that a magnetic case switch controls the power on of the Core. This switch seems to be on the LED board. People have bypassed this by putting a magnet on the switch.

 

Instead of buying the LED board, I wanted to find the 5Vsb signal from the LED board connecting cable and run it to ground (through a resistor) to power the mainboard on.

The pins are too small to work with however. I want therefore to buy the correct (ribbon?) connector and then work with those cables. Can anyone advise what the 1x10pin connector type is?

[5x5]

It's an OEM part. Ask razer to sell you one

[vcSjJ5jU80]

On 5/26/2020 at 10:12 AM, 5x5 said:

It's an OEM part. Ask razer to sell you one

Thanks. I hope this is possible and have asked. Always a pain to have proprietary connectors. I'm holding out some hope for another way to get hold of one!

[Explorer]

Were you able to get plugs or cables somewhere?
Do you know which pins have to be connected to start the board?
Thanks.