Jump to content

Reboot and Select proper Boot device error?

Ok I recently upgraded the Graphics card of my PC from a GTX 1050ti to a RTX 2070 super. On the initial upgrade everything ran fine, but I ran into a bit of hang up. I was left with only one HDMI port on the graphics card, so I decided to install the GTX back in to act as 2nd hdmi port for my 2nd monitor. Now, I keep getting the "Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key" message. I've triple checked all of my connections, went into the BIOS to see if the SSDs and HDD are being read (and they are...) but I still can't get it to boot! Can someone please help me?!

TUF Gaming B450+ Motherboard

AMD Ryzen 5 2600

Windows 10 Pro

Corsair DDR4 16GB RAM x2 8 GB cards

RTX 2070 Super

SSD 480GB

SSD 128 SSD

2TB HDD

 

 

20200424_140420.jpg

20200424_140452.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

Next time, there is a Screenshot / Print Screen option within the ASUS BIOS.

 

Do you still have the GTX 1050 Ti in the system?

If so, take that out.

 

The BIOS detects...I'm assuming... all 3 drives.

Currently, the boot drive is set as the Kingston drive.

 

Is your OS/Windows installed on THAT Kingston drive?

If not, you'll need to switch it to the proper boot drive.

Currently, it is only trying to boot from the Kingston drive, and nothing else.

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, -rascal- said:

 

Is your OS/Windows installed on THAT drive?

If not, you'll need to switch it to the proper boot drive.

it is the OS drive

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, -rascal- said:

Do you still have the GTX 1050 Ti in the system?

 

i took it out

Link to comment
Share on other sites

Link to post
Share on other sites

It looks like you're trying to boot a legacy BIOS. You might have to switch it to UEFI: <your sata drive here>

Main: AMD Ryzen 7 5800X3D, Nvidia GTX 1080 Ti, 16 GB 4400 MHz DDR4 Fedora 38 x86_64

Secondary: AMD Ryzen 5 5600G, 16 GB 2667 MHz DDR4, Fedora 38 x86_64

Server: AMD Athlon PRO 3125GE, 32 GB 2667 MHz DDR4 ECC, TrueNAS Core 13.0-U5.1

Home Laptop: Intel Core i5-L16G7, 8 GB 4267 MHz LPDDR4x, Windows 11 Home 22H2 x86_64

Work Laptop: Intel Core i7-10510U, NVIDIA Quadro P520, 8 GB 2667 MHz DDR4, Windows 10 Pro 22H2 x86_64

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, svmlegacy said:

It looks like you're trying to boot a legacy BIOS. You might have to switch it to UEFI: <your sata drive here>

How? please?

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, StrykirDarque said:

it is the OS drive

 

3 minutes ago, StrykirDarque said:

i took it out

 

Okay, cool.

I would proceed to double check your SATA power + data cables going to those your SSDs/HDDs.

Check both motherboard side (e.g. the SATA ports), and the drive side.

Check for any semi-loose connections

 

2 minutes ago, svmlegacy said:

It looks like you're trying to boot a legacy BIOS. You might have to switch it to UEFI: <your sata drive here>

Ah good call

👍

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, -rascal- said:
6 minutes ago, svmlegacy said:

It looks like you're trying to boot a legacy BIOS. You might have to switch it to UEFI: <your sata drive here>

 

Boot Device Control? UEFI only

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, -rascal- said:

I would proceed to double check your SATA power + data cables going to those your SSDs/HDDs.

Check both motherboard side (e.g. the SATA ports), and the drive side.

Check for any semi-loose connections

I've double checked all connections....

Link to comment
Share on other sites

Link to post
Share on other sites

12 minutes ago, StrykirDarque said:

Boot Device Control? UEFI only

Then it might be the inverse of what I said. Can you enable the CSM (Compatibility Support Module)?

Main: AMD Ryzen 7 5800X3D, Nvidia GTX 1080 Ti, 16 GB 4400 MHz DDR4 Fedora 38 x86_64

Secondary: AMD Ryzen 5 5600G, 16 GB 2667 MHz DDR4, Fedora 38 x86_64

Server: AMD Athlon PRO 3125GE, 32 GB 2667 MHz DDR4 ECC, TrueNAS Core 13.0-U5.1

Home Laptop: Intel Core i5-L16G7, 8 GB 4267 MHz LPDDR4x, Windows 11 Home 22H2 x86_64

Work Laptop: Intel Core i7-10510U, NVIDIA Quadro P520, 8 GB 2667 MHz DDR4, Windows 10 Pro 22H2 x86_64

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, svmlegacy said:

Then it might be the inverse of what I said. Can you enable the CSM (Compatibility Support Module)?

 

20200424_144825.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

37 minutes ago, svmlegacy said:

Then it might be the inverse of what I said. Can you enable the CSM (Compatibility Support Module)?

Windows 10 is UEFI only, though.

If you were to trying to install...say Windows Vista, or trying to get legacy hardware to work (e.g. some serial port / parallel port hardware), then you would have CSM enabled.

 

36 minutes ago, StrykirDarque said:

Do I need to re-install WinOS?

It *COULD* be that the Windows OS got corrupted.

Do you still have the installation media?

Wondering if you can use that to recover/repair the corrupted sections of of the OS, and not need to FULLY reinstall it.

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, -rascal- said:

It *COULD* be that the Windows OS got corrupted.

Well the reinstall idea won't work. According to the media it can't do anything. I guess I'm just screwed.

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, StrykirDarque said:

I just bricked my damn computer......

What do you mean by that?

Can you give a better description of what happened?

Are you still able to get into the BIOS?

 

Are you able to reinstall Windows then?

When installing Windows, you need to set the boot priority (or boot override) as the install media -- e.g. the DVD / USB stick, etc.

 

 

EDIT: 

Out of curiosity, I went to check the BIOS you are using (version 0221 in your screenshot).

Your BIOS is quite outdated; your motherboard is currently using the first INITIAL release BIOS for that board, from June/22/2018.

When you get a chance, it might be a good idea to flash it to one of the newer BIOS firmware (e.g. version 2008 / 2006 / 1823).

You're missing a couple of the important AGESA patches, stability/compatibility/performance updates, etc.

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites

Link to post
Share on other sites

5 hours ago, -rascal- said:

Windows 10 is UEFI only, though.

I have many systems running windows 10 through legacy BIOS mode. UEFI is not required.

 

3 hours ago, StrykirDarque said:

I just bricked my damn computer......

Can you elaborate? I'd be very surprised if you can't do a fresh install.

Main: AMD Ryzen 7 5800X3D, Nvidia GTX 1080 Ti, 16 GB 4400 MHz DDR4 Fedora 38 x86_64

Secondary: AMD Ryzen 5 5600G, 16 GB 2667 MHz DDR4, Fedora 38 x86_64

Server: AMD Athlon PRO 3125GE, 32 GB 2667 MHz DDR4 ECC, TrueNAS Core 13.0-U5.1

Home Laptop: Intel Core i5-L16G7, 8 GB 4267 MHz LPDDR4x, Windows 11 Home 22H2 x86_64

Work Laptop: Intel Core i7-10510U, NVIDIA Quadro P520, 8 GB 2667 MHz DDR4, Windows 10 Pro 22H2 x86_64

Link to comment
Share on other sites

Link to post
Share on other sites

2 hours ago, -rascal- said:

Can you give a better description of what happened?

Are you still able to get into the BIOS?

OK, I was initially re-installing the GTX because I needed the extra HDMI port. Afterward the it started showing the "Boot Device" error. I thought it was a loose cable so I triple-checked all of them, even completely rewired the whole system.... still nothing. Before I gave up on it for the day, I tried repairing the OS thinking that might be the issue. It won't repair it or re-install. So I'm lost here....

Oh, and yes I can still get into the BIOS.

Link to comment
Share on other sites

Link to post
Share on other sites

I'm still relatively new to custom PCs. I must have messed up something.... I just can't think of what it might be....

Link to comment
Share on other sites

Link to post
Share on other sites

2 hours ago, -rascal- said:

When you get a chance, it might be a good idea to flash it to one of the newer BIOS firmware (e.g. version 2008 / 2006 / 1823).

You're missing a couple of the important AGESA patches, stability/compatibility/performance updates, etc.

Unfortunately I don't know how...

Link to comment
Share on other sites

Link to post
Share on other sites

I'm gonna try to get a new m.2 and install the OS on that.... see if that works.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×