Jump to content

I have experience with computer hardware so it pains me to write this.

My issue is that when powered on, i get 1 long beep and 3 short, after 5 more seconds it beeps again.

 

My specs are:

Ryzen 9 3900x

Gskill tridentZ 32gb at 3600mhz (2 16gb)

ASUS prime X570-PRO 

Rx 580

Seasonic Focus Gold 1000w

 

Weve tried everything, all cables are securely plugged in. The fans power on and all the rgb turns on. Ram is seated correctly and it literally just wont work.

Its 1 am and i really need this to just work. When its plugged in with hdmi to the mb it does the beeps. When pugged in through the gpu, the fans on anything dont spin and when the powerbutton is clicked it, the power supply goes *ting*.

 

Any tips would be helpful so, thanks :)

 

EDIT: the motherboard manual says that the beeps mean no "vga" but it will not display to my monitor or tv. 

Link to comment
https://linustechtips.com/topic/1163531-new-build-wont-boot-or-post/
Share on other sites

Link to post
Share on other sites

1 minute ago, Gamer02032003 said:

you can try reming the gpu and strating it through the intergrated graphics, or try resseting the bios, maybe a bios update, don't think so but you can try

Unfortunately i cant even get to bios and it still beeps through the motherboard display port.

Link to post
Share on other sites

Just now, Asuka said:

Unfortunately i cant even get to bios and it still beeps through the motherboard display port.

is there a battery on your mobo?, try gently removing it and wait about 30 seconds and put it back during this time on plug all power 

Link to post
Share on other sites

do amd cpus have integrated gpu? of so turn off the pc and remove graphics card clear cmos, check your hdmi. if bent in midlle wiggle it. make sure whatever screen its commected to is on and on the right source before even thinking of turning on the pc. if you turn it on before it will not post after unless you turn the pc on and off.

main rig:

CPU: 8086k @ 4.00ghz-4.3 boost

PSU: 750 watt psu gold (Corsair rm750)

gpu:axle p106-100 6gbz msi p104-100 @ 1887+150mhz oc gpu clock, 10,012 memory clock*2(sli?) on prime w coffee lake igpu

Mobo: Z390 taichi ultimate

Ram: 2x8gb corsair vengence lpx @3000mhz speed

case: focus G black

OS: ubuntu 16.04.6, and umix 20.04

Cooler: mugen 5 rev b,

Storage: 860 evo 1tb/ 120 gb corsair force nvme 500

 

backup

8gb ram celeron laptop/860 evo 500gb

Link to post
Share on other sites

i use intel integrated and its this way.

main rig:

CPU: 8086k @ 4.00ghz-4.3 boost

PSU: 750 watt psu gold (Corsair rm750)

gpu:axle p106-100 6gbz msi p104-100 @ 1887+150mhz oc gpu clock, 10,012 memory clock*2(sli?) on prime w coffee lake igpu

Mobo: Z390 taichi ultimate

Ram: 2x8gb corsair vengence lpx @3000mhz speed

case: focus G black

OS: ubuntu 16.04.6, and umix 20.04

Cooler: mugen 5 rev b,

Storage: 860 evo 1tb/ 120 gb corsair force nvme 500

 

backup

8gb ram celeron laptop/860 evo 500gb

Link to post
Share on other sites

1 minute ago, Snowarch said:

i use intel integrated and its this way.

We tried multiple displays, my msi monitor and my bedroom tv, both on and give no signal through the mb. Also, AMD does not have integrated graphics. 

 

 

It makes me wish i bought an i9 instead because ive had ALOT of experience with intel, this is my first time ever touching something AMD related.

Link to post
Share on other sites

1 minute ago, Asuka said:

It was originally in the second slot and we moved it to the first and it fixed nothing :/

and your powercables are connected to the right bank on the powersupply? 

as long as it beeps it's a physical error of the setup regarding the gpu. not properly plugged in etc.. did you remove the pcie slot shield? pull back the locking pin before inserting it etc? 

 

Link to post
Share on other sites

2 minutes ago, Robchil said:

and your powercables are connected to the right bank on the powersupply? 

as long as it beeps it's a physical error of the setup regarding the gpu. not properly plugged in etc.. did you remove the pcie slot shield? pull back the locking pin before inserting it etc? 

 

Yes everything clicks together and it should all work. I even tried using my vertical mount pcie extension and that didnt work.

Link to post
Share on other sites

1 minute ago, Robchil said:

you have another pcie gpu avaiable? from an older computer? 

 

I have a evga Gtx 9800+ from 2009 lol

I dont have a DVI cable though so i ordered some of the things i would need. Not sure if that would fix it but i hope 

Link to post
Share on other sites

Just now, Robchil said:

no but just try it to see if you get through post.. no beeps means the new gpu is DOA..  beeps means oh wait... ryzen 9? did it come with a torq driver? .. try to reseat your CPU..  and tighten it to the correct torq. 

Torq driver?

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×