Jump to content

my PC won't start

rtty19
By rtty19
in Troubleshooting
 Share
Go to solution Solved by rtty19,

no i never mentiond putting it back in i said take every thing out apart from mobo cpu and psu and then start is.

it's fine i found out yesterday the problem it was my displayport cable

apparently some times they keep charge inside of the cable and this what doesn't let the pc to start

i fixed it by simply switching back to dvi and want today to replace the cable

 

thanks all of you very much (even though in the end it was the most stupid problem i ever encountered and i didn't need your help(stupid cable)) 

Posted

Yesterday I sutdown my PC normally and than after about an ten minutes started it again for check something and it started up the led and the fans and than shutdown and than again in infant loop(It didn't even showed me the boot screen. it was like one second and than it waited for the fans to stop spinning and than it started again) so I sut it down and than today I tried to boot it up again and it boot but it didn't regonized my HHD but it regonized my dual ssd in raid configuration so I boot it down to see inside if something is not connected correctly and everything seem OK so I boot it up again and it did the Same thing that it did yesterday

Please help me I don't know what to do

PS. I don't know of it help but I tried my HHD on other PC and it worked fine

If something is missing please tell me

My PC speq

Nzxt tempast 410 elite

4670k oc to 4.2ghz

Gigabyte z87mx-d3h motherboard

Syntec ninja 3 (I'm not really sure)

2X8 crucial mamory 1600 MHz

Windforce 780ti

2Xsamsung sad I'm raid 0

Segate 1tb

Seasonic 620w bronze

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

try diferent port and or cable 

If you tell a big enough lie and tell it frequently enough it will be believed.

-Adolf Hitler 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)

What do you mean?

You mean the outlet or in the sata?

please if you want to ask me a question quote my post 

try a diferent sata port on the mobo and mabey use a diferent cable 

oh and reset cmos

Edited by legopc

If you tell a big enough lie and tell it frequently enough it will be believed.

-Adolf Hitler 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

please if you want to ask me a question quote my post

try a diferent sata port on the mobo and mabey use a diferent cable

oh and reset cmos

I don't know what you mean by CMOS

But I tried to switch sata cable and even tried to put the graphic card out and plagging out all the sata cables

And still the system restarts in a loop

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I don't know what you mean by CMOS

But I tried to switch sata cable and even tried to put the graphic card out and plagging out all the sata cables

And still the system restarts in a loop

oh ehm never mind was talking about a diferent issue try unplugging everything apart from psu mobo cpu so no ram no ssd just those things 

If you tell a big enough lie and tell it frequently enough it will be believed.

-Adolf Hitler 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

oh ehm never mind was talking about a diferent issue try unplugging everything apart from psu mobo cpu so no ram no ssd just those things

I currently want to work so I will try it once I get home

Thank you

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

oh ehm never mind was talking about a diferent issue try unplugging everything apart from psu mobo cpu so no ram no ssd just those things

I hope that now it's not too late in your time zone (because in me area it's 3a.m)

Can you please explain what do you mean

Like tear apart all beside the CPU,PSU and the cooler?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I hope that now it's not too late in your time zone (because in me area it's 3a.m)

Can you please explain what do you mean

Like tear apart all beside the CPU,PSU and the cooler?

He means unplug your Hard Drive and RAM and put it back in again.

System Specs:

CPU: Ryzen 7 5800X

GPU: Radeon RX 7900 XT 

RAM: 32GB 3600MHz

HDD: 1TB Sabrent NVMe -  WD 1TB Black - WD 2TB Green -  WD 4TB Blue

MB: Gigabyte  B550 Gaming X- RGB Disabled

PSU: Corsair RM850x 80 Plus Gold

Case: BeQuiet! Silent Base 801 Black

Cooler: Noctua NH-DH15

 

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

He means unplug your Hard Drive and RAM and put it back in again.

OK thank you I will try now
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

oh ehm never mind was talking about a diferent issue try unplugging everything apart from psu mobo cpu so no ram no ssd just those things

I found out something now

When I pushed the button and my displayport cable was in the PC didn't start and when it was out it did start

WTF?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

He means unplug your Hard Drive and RAM and put it back in again.

no i never mentiond putting it back in i said take every thing out apart from mobo cpu and psu and then start is.

If you tell a big enough lie and tell it frequently enough it will be believed.

-Adolf Hitler 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Go into the BIOS and turn your Clock Speeds down back to normal. If your Motherboard has a Low, Medium, High. setting in the simple UI Put it on low and try booting it. 

P.T Networx Australia

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Oh and don't flash your CMOS. 
Doing that will cause more problems than it solves, You will most likely need to reconfigure the RAID set up which can be a big problem if you dont know how to set it up. 
Best option is if you dont know what the CMOS is, You're better off taking it back to whoever built it. 

Pay a few bucks for peace of mind.

P.T Networx Australia

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

no i never mentiond putting it back in i said take every thing out apart from mobo cpu and psu and then start is.

Why? The PC wouldn't start anyway without RAM. All it would do is beep (if the mobo has a speaker).

System Specs:

CPU: Ryzen 7 5800X

GPU: Radeon RX 7900 XT 

RAM: 32GB 3600MHz

HDD: 1TB Sabrent NVMe -  WD 1TB Black - WD 2TB Green -  WD 4TB Blue

MB: Gigabyte  B550 Gaming X- RGB Disabled

PSU: Corsair RM850x 80 Plus Gold

Case: BeQuiet! Silent Base 801 Black

Cooler: Noctua NH-DH15

 

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
  • Solution

no i never mentiond putting it back in i said take every thing out apart from mobo cpu and psu and then start is.

it's fine i found out yesterday the problem it was my displayport cable

apparently some times they keep charge inside of the cable and this what doesn't let the pc to start

i fixed it by simply switching back to dvi and want today to replace the cable

 

thanks all of you very much (even though in the end it was the most stupid problem i ever encountered and i didn't need your help(stupid cable)) 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×