Airflow issues? Or not

[gavinleejia]

Hey so I have recently build my very first rig, it's low level entry rig and here are the specs:

 

1. Ryzen 5 2600

2. Kingston 16gb 3200mhz

3. Rx580 8gb

4. B450m steel legend

5. Adata nvme m.2 512gb

6. Corsair C650M 

7. Tecware Alpha M 

 

A question from me is that will the GPU be suffocating due to the lack of airflow? Do refer to the attached picture. Any suggestions will be appreciated. 

 

Do ignore the PSU not being plugged in I'm still waiting for it to arrive. 

 

[Jumballi]

plz send pic of front pannel at multiple angles

[DoctorNick]

Don't think so as the front is pure mesh. You could try checking temps when gaming or stress testing. Download Hwinfo64: https://www.hwinfo.com/download/

[Geoff35674567]

This is fine. When you do get it running you will notice your GPU will be way hotter than your 2600. This is normal.

[LogicalDrm]

GPU will be hot, but thats more about PSU shroud than anything else.

[Midnitewolf]

Unless there is something restricting the front it should be fine.  I also don't think much you can do differently to get any more airflow to the GPU and should be good enough for the GPU to run as expected.

[Mutuh]

You could try mounting the intake fans a bit lower.

[gavinleejia]

14 hours ago, Jumballi said:

plz send pic of front pannel at multiple angles

Ah shit, i am at work now ahahahahah, but it's full mesh doe

 

14 hours ago, DoctorNick said:

Don't think so as the front is pure mesh. You could try checking temps when gaming or stress testing. Download Hwinfo64: https://www.hwinfo.com/download/

Alright sure thanks alot! 

 

14 hours ago, Geoff35674567 said:

This is fine. When you do get it running you will notice your GPU will be way hotter than your 2600. This is normal.

Ah alright, first time building a pc and kinda scared i fucked up on the measurements

 

11 hours ago, LogicalDrm said:

GPU will be hot, but thats more about PSU shroud than anything else.

Welp, i guess it should be fine? Ahahhaha 

 

4 hours ago, Midnitewolf said:

Unless there is something restricting the front it should be fine.  I also don't think much you can do differently to get any more airflow to the GPU and should be good enough for the GPU to run as expected.

Aye thanks, will see how it runs when my PSU is here. 

 

3 hours ago, Mutuh said:

You could try mounting the intake fans a bit lower.

That's a big brain move right there will try it. Thanks! 

[Jumballi]

5 hours ago, gavinleejia said:

Ah shit, i am at work now ahahahahah, but it's full mesh doe

Even with full mesh, they somehow still screw up, as for the internals, it looks absolutely stunning and shouldn’t have any issues.

[Whiro]

1 hour ago, Jumballi said:

Even with full mesh, they somehow still screw up, as for the internals, it looks absolutely stunning and shouldn’t have any issues.

He’s at work so quick google search shows this

[Jumballi]

2 minutes ago, Whiro said:

He’s at work so quick google search shows this

Then idk why op needs to be worried, looks perfect to me in every aspect.

[Whiro]

Btw I really like the look of this case, unfortunately it’s not available to buy anywhere in UK, otherwise I would consider getting it.

[Whiro]

6 minutes ago, Jumballi said:

Then idk why op needs to be worried, looks perfect to me in every aspect.

Only thing which I noticed is there is another dust filter underneath the mesh.  
 

@gavinleejia of you not happy with the temps you can always try to remove that other dust filter and see if that improve temps