I9 9900k 5.2Ghz Oc Voltage / temp check

[BerserkHealer]

Hi All,

 

Just want to see if you all think these are ok voltages and temps? 

 

i ran prime 95 26.6 for over a hour, also gamed on it for over 2 hours and no crashes.

 

i will run prime 95 26.6 again while i sleep to make sure no crashes 

 

avx is set to 0

 

voltage is at 1.365 with llc set to turbo so HW says it hits 1.38 max

 

when i OC 5ghx only my voltage is stable at 1.255 volt with avx at 0

 

u think its worth just leaving it at that? 

 

 

HWMonitor.txt

[BerserkHealer]

i do have another question tho about voltages tho... as my llc is at turbo...and i upped my voltage up in the bios to 1.260 as this was round about what the max was showing in hw monitor... but now for some reason even tho this is a little more voltage, in MSI afterburner it is now showing my cpu clock to be a red line and not a green line. from my understanding of msi afterburner, when its green it means it is going past what it can monitor / the value. 

 

any ideas on what would be best thing to do??

[Falkentyne]

Use HWinfo64 to post your stats, not HWmonitor.  HWmonitor is garbage.  Like what the hell is VIN1/2/3/4/5 ?  There are no "2.00" voltages anywhere.

Look for VR VOUT and the entire VRM Section in HWInfo64.  That shows a lot of useful information including current and accurate cpu watts (CPU Package Power is VID * Amps and VID is often not accurate).