Hardline cutting/trimming

[Yatys 93]

shopping for parts for an upcoming hardline water cooling build, got the pipe cutter, got a deburr tool, got a hose cutting too, not bought the bending stuff yet as they are coming with the tube itself in that order, what I am trying to find out is what is the name of the drill bit Jaystwocents uses to trim/file the tubing, would like to have it to hand just in case.

 

anyone got any ideas? or anything I've missed

[2FA]

Got a link with a timestamp to a video showing it?

[Yatys 93]

1 minute ago, 2FA said:

Got a link with a timestamp to a video showing it?

around 11:10 and again around 12:30, tbh he uses it in a lot of videos and as far as I know has never actually said what it is

[Yatys 93]

again in this one at 4:28, currently working my way through old video's in case he mentioned it somewhere

[Ravendarat]

It’s from EKWB. I bought one and it’s totally worth it. Just go to ekwb and look under the tools section

[Neggy-Z]

PrimoChill also sell one, they called it a finishing bit:

https://www.primochill.com/search?type=product%2Carticle&q=NOT+tag%3A__gift+AND+Rigid+Tubing+Finishing+Bit*

[Blai5e]

17 hours ago, Ravendarat said:

It’s from EKWB. I bought one and it’s totally worth it. Just go to ekwb and look under the tools section

I think OP was referring to the Primochill Finishing Bit, not a tube reamer.

 

20 hours ago, Yatys 93 said:

what I am trying to find out is what is the name of the drill bit Jaystwocents uses to trim/file the tubing, would like to have it to hand just in case.

I have the Primochill Finishing Bit and it works much better than a reamer (and works well if you need to trim the length down a bit as well). In Jay's latest build (Using Metal Tubes for my loop! Here's how), he used it on metal tubing as well. Just make sure you buy the correct bit for the tube size you intend to use.

[Ravendarat]

4 hours ago, Blai5e said:

I think OP was referring to the Primochill Finishing Bit, not a tube reamer.

 

I have the Primochill Finishing Bit and it works much better than a reamer (and works well if you need to trim the length down a bit as well). In Jay's latest build (Using Metal Tubes for my loop! Here's how), he used it on metal tubing as well. Just make sure you buy the correct bit for the tube size you intend to use.

That is what I meant, I thought I ordered mine from EK but obviously I ordered it from Primo, my bad, thanks for the correction

[kbal]

Anybody got any idea where to get something like the Primochill finishing bit in EU? Shipping is 2x the price of the bit from their store.

[Yatys 93]

On 9/10/2019 at 11:53 PM, Ravendarat said:

That is what I meant, I thought I ordered mine from EK but obviously I ordered it from Primo, my bad, thanks for the correction

 

On 9/10/2019 at 7:22 PM, Blai5e said:

I think OP was referring to the Primochill Finishing Bit, not a tube reamer.

 

I have the Primochill Finishing Bit and it works much better than a reamer (and works well if you need to trim the length down a bit as well). In Jay's latest build (Using Metal Tubes for my loop! Here's how), he used it on metal tubing as well. Just make sure you buy the correct bit for the tube size you intend to use.

 

On 9/10/2019 at 8:20 AM, ShadyHamster said:

PrimoChill also sell one, they called it a finishing bit:

https://www.primochill.com/search?type=product%2Carticle&q=NOT+tag%3A__gift+AND+Rigid+Tubing+Finishing+Bit*

you guys are the best!!!! sorry for the late reply! been away from home!