New build first launch help

[The Torrent]

So I just did a new build.

 

turned it on first time.

 

b450 f asus mobo

corsair h115i coole plugged into cpu opt ( all lights up fine)

re cpu cooler it says ‘cpu fan speed error). The 2 fans on the cpu are all spinning plugged into the hub then usb into commander pro.

16gb Corsair vengeance pro 3600

 

i have a sabrent rocket 1tb m.2 inside I’m not sure if it should be picking that up.

 

plese check attached photo and tell me if anything is wrong.

 

[Spotty]

Just now, The Torrent said:

The 2 fans on the cpu are all spinning plugged into the hub then usb into commander pro.

It's because of this. The motherboard is expecting something plugged in to the CPU_FAN header on the motherboard, and when it doesn't see it, it will assume that you do not have a CPU fan plugged in which could be dangerous (CPU overheat).
Either plug a fan in to the CPU_Fan header or disable the safety check in the BIOS. Consult your motherboard manual for how to disable it.

[berberries]

is the pump plugged into the CPU FAN header? if so, ensure that in uefi bios you set the fan speed for the cpu fan to be max 100% at all times.

[The Torrent]

Does this all look good?

[The Torrent]

2 minutes ago, berwynhan said:

is the pump plugged into the CPU FAN header? if so, ensure that in uefi bios you set the fan speed for the cpu fan to be max 100% at all times.

It’s plugged into cpu opt

[The Torrent]

Are the temps and the voltage too high?