4d msi Mobo error code X570

[Mouse-Potato]

Hello all,

Just assembled my new ryzen build, here are the specs:

X570 MSI MEG ACE

2200g processor (for the moment)

Gskill 3600 CL 16 8gb x2

PSU: Corsair Rm 550x

GPU: MSI RX 580 

 

Things to note, this mobo has 2 auxillary power ports at the top, my pay only cam with one extra cable for this port therefore only one of the 2 auxillary ports is plugged in. I don't think 2 are actually required to run everything properly especially since there is a 2200G installed.

 

I did a BIOS flash with USB flash drive and using the appropriate manipulation. It flashed through the bios update and then turned off, therefore I assume the update procedure was successful.

 

I am now getting a 4d error code on the mobo, the Dram light was on so I threw a 4 gb stick in it. Now the light had gone out but I still am getting the 4d code.

 

Any ideas? Has this issue occurred to anyone else?

 

Thanks!

[Vlad123677]

Hey, did you get anywhere with this? I have the same problem..  I put a build together yesterday and and it just wouldn't boot up. The first time I turned it on it gave me the error message b1 on the motherboard. And it was just stuck like that. When I turn it off and start again, the CPU light comes on together with the 4d error code on the motherboard. Now if I disconnect the power supply and let the system drain and power it on.. I'm going to b1 again with a cpu light and a 4d as I reboot the system. Tried so many things and though the cpu might be gone, but it into my old B450 motherboard and it is working fine there. 

 

System build: 

Cpu: AMD Ryzen 2400G

Motherboard: X570 Msi ACE

RAM: G.SKILL Trident Z 16GB 3200

PSU: EVGA 500W 

GPU: Sapphire RX 580 Nitro+ 8GB

 

Any help would be greatly appreciated as I'm genuinely out of ideas at this stage.

[Mouse-Potato]

On 8/15/2019 at 3:11 PM, Vlad123677 said:

Hey, did you get anywhere with this? I have the same problem..  I put a build together yesterday and and it just wouldn't boot up. The first time I turned it on it gave me the error message b1 on the motherboard. And it was just stuck like that. When I turn it off and start again, the CPU light comes on together with the 4d error code on the motherboard. Now if I disconnect the power supply and let the system drain and power it on.. I'm going to b1 again with a cpu light and a 4d as I reboot the system. Tried so many things and though the cpu might be gone, but it into my old B450 motherboard and it is working fine there. 

 

System build: 

Cpu: AMD Ryzen 2400G

Motherboard: X570 Msi ACE

RAM: G.SKILL Trident Z 16GB 3200

PSU: EVGA 500W 

GPU: Sapphire RX 580 Nitro+ 8GB

 

Any help would be greatly appreciated as I'm genuinely out of ideas at this stage.

I figured it out!

My X570 board isn't compatible with 2200g and 2400g processors...

Bought a 3900x and now it works.