Jump to content

Help with VRM temps

Go to solution Solved by LukeSavenije,

and about the vrm part, a fan helps

Hello everyone , i have been having alot of frame drops and the only thing i can see are these temps on hwinfo VR VCC temperature are these vrms?
might this be causing the drops ? because everytime i get drops the temp on that raises by 1 or 2 and then jumps back down , normally it is at 66 idle when gaming it jumps from 66 to 67 ,68 degrees 
if anyone can help me i would be very apreciated temps are on the image bellow , thank you

https://imgur.com/a/i0ixSGe

 

PC SPECS :
► CPU :
 i7 8700 k normally OCd at 4.5 ghz now i went to 4.0 to see if it made a diference it did not 
►GPU: GTX 1080 8GB Non OC
 MB: ASUS Prime z370-p
 RAM: Gskill RIpjaws v 2500 MHz
 PSU: Thermaltake Berlin 80+ 630w

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/
Share on other sites

Link to post
Share on other sites

Your temps are fine.  Tho it's odd that it rises 1-2 degrees only when under load. May want to remeasure that.

 

2500MHz RAM?  Did you mean 2400MHz?

 

Crank that 8700K up to high 4's or even 5GHz.  Your VRMs are fine and can handle it.

"Do what makes the experience better" - in regards to PCs and Life itself.

 

Onyx: Ryzen 7 7800X3D / Gigabyte B650 AORUS Pro AX / ASRock Taichi 7900xtx OC / G. Skill Flare X5 6000CL36 64GB (4x16GB) / Samsung 980 1TB x3 / Super Flower Leadex V Plat Pro 1000 / EK-AIO 360 Basic w/ Silent Wings fans / Fractal Design North XL (black mesh) / LG - UltraGear 45" OLED QHD 240Hz / Mackie CR5BT / SteelSeries Arctis Nova Pro / Cherry MX Board 3.0 / Logitech G502 - https://valid.x86.fr/my9nnr

 

7800X3D - PBO +200, CO -30 all cores, 4.90GHz all core, 5.05GHz single core, Cinebench 23: 18401 multi, 1779 single

 

Khaleesi: Ryzen 5 5600X3D (+200, -30) - ASRock B550M Pro4 - G. Skill Ripjaws V 16GB 3200CL16 - Asus Prime 9060XT 16GB - Samsung 980 1TB + Crucial MX500 1TB - Cudy AX3000 PCIe Wifi 6 - EVGA SuperNOVA 650 P2 - Thermalright Frozen Notte RGB 360 White V2 - NZXT H6 Flow RGB White - LG 34" 3440x1440

 

NAS/Plex/Game Server  Ryzen 9 5900XT 16c/32t - Gigabyte B550M AORUS Elite AX - TeamGroup T-Force Vulcan 64GB 3200CL16 - MSI 1050Ti 4GB - Crucial P3 Plus 500GB + TeamGroup MP44L 2TB (Game) + WD Red Plus 4TBx2 (Plex) - TP-Link AC1200 PCIe Wifi - EVGA SuperNOVA 650 P2 - Thermalright Peerless Assassin 120SE - ASUS Prime AP201 - Currently Hosting: Enshrouded x2, Hytale, Icarus, Windrose. Project Zomboid, Dune Awakening.

 

Sage: Ryzen 7 7800X3D (+200, -30) - Gigabyte B650 Gaming X V2 - ASRock Steel Legend 7900GRE - G. Skill Flare X5 32GB 6000CL32 - TeamGroup MP44L 2TB - Super Flower Leadex Platinum SE 1000w - NZXT H5 Elite

 

Emma: i9 9900K @5.2Ghz - Gigabyte Z370 AORUS Gaming 5 - MSI 6900XT Gaming X Trio - G. Skill Ripjaws V 32GB 3200CL16 - 750 EVO 512GB + 2x 860 EVO 1TB (RAID0) - Super Flower Combat FG 850w - Thermaltake Water 3.0 Ultimate 360 - Fractal Design Define R6 - TP-Link AC1900 PCIe Wifi

 

GF Rig: Steam Deck 512GB OLED, Vizio 43" 4K TV

 

Extra parts: ASUS 6650XT - Gigabyte 1080Ti - Cooler Master Q300L - Gigabyte 450w PSU - Super Flower Leadex V Plat Pro 850w

 

OnePlus Ecosystem: 

OnePlus 11 5G - 16GB RAM, 256GB NAND, Eternal Green. OnePlus Watch 2 - Radiant Steel, OnePlus Buds Pro 2 - Eternal Green

3D Printing: 

Bambu Lab X1 Carbon, AMS, AMS2 Pro (thank you MicroCenter!)

Other Interesting Tech:

- 2021 Volvo S60 Recharge T8 PHEV Polestar Engineered - 415hp/495tq 2.0L 4cyl. turbocharged, supercharged and electrified.

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801078
Share on other sites

Link to post
Share on other sites

Yes I believe that to be your VRM's (VR). Those temps should still be fine. I used to have a B350M (AM4) board and the system wouldn't crash until my VRM's were hitting 77C.

The frame drops wouldn't have anything to do with your VRM temps. It can be caused by a number of different things. I would monitor your cpu and gpu utilization percentage. I used to have a Ryzen 7 1700 and while playing PUBG the chip would randomly downclock itself while under heavy load, causing a significant drop in frames.

Does the drop in frames happen to a number of different applications or only one?

Intel Core i7 9700F / Cooler Master 212 Evo / GeForce GTX 1660 SUPER / 16 GB G.SKILL RAM @ 2666MHz / GA-B365M-DS3H / EVGA 500w PSU

HP Pavilion Gaming 15 / Ryzen 5 4600H / GeForce GTX 1050 / 8 GB @ 3200MHz

 

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801100
Share on other sites

Link to post
Share on other sites

I havent really tested with aida64 i did it once for like 10 secs and my temps were almost at 80 c and i stoped it imediatly cause i was kinda scared i mostly use cinebench and my temps reach 70 c at 4.5 ghz , i will try to do it again with aida64 and comeback and tell you guys the results , and even when im browsing those temps keep going up and down from 64 c up to 67 , i dont know what else might be causing the drops but i feel like with this setup i should have good performance in games  but it just doesnt 

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801103
Share on other sites

Link to post
Share on other sites

3 minutes ago, Brent744 said:

Yes I believe that to be your VRM's (VR). Those temps should still be fine. I used to have a B350M (AM4) board and the system wouldn't crash until my VRM's were hitting 77C.

The frame drops wouldn't have anything to do with your VRM temps. It can be caused by a number of different things. I would monitor your cpu and gpu utilization percentage. I used to have a Ryzen 7 1700 and while playing PUBG the chip would randomly downclock itself while under heavy load, causing a significant drop in frames.

Does the drop in frames happen to a number of different applications or only one?

Thats the weird thing my cpu and gpu utilization never go above 50 mostly 36 cpu and max 40 gpu , cpu and gpu temps are also fine cpu never goes above 60c  it stays mostly at 47-55 c and gpu never goes above 46c that was the only thing i could see going up and down every 2 or 3 secs :/

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801108
Share on other sites

Link to post
Share on other sites

1 minute ago, IIGodlikemode said:

Thats the weird thing my cpu and gpu utilization never go above 50 mostly 36 cpu and max 40 gpu , cpu and gpu temps are also fine cpu never goes above 60c  it stays mostly at 47-55 c and gpu never goes above 46c also the clocks dont go down , that was the only thing i could see going up and down every 2 or 3 secs :/

 

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801111
Share on other sites

Link to post
Share on other sites

15 minutes ago, jstudrawa said:

Your temps are fine.  Tho it's odd that it rises 1-2 degrees only when under load. May want to remeasure that.

 

2500MHz RAM?  Did you mean 2400MHz?

 

Crank that 8700K up to high 4's or even 5GHz.  Your VRMs are fine and can handle it.

I had it at 2400 went to 2600 but it crashed my game and now im at 2555mhz  i think 

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801118
Share on other sites

Link to post
Share on other sites

4 minutes ago, IIGodlikemode said:

I will try that but its gonna be tricky because my gpu sit right above the vrm heatsink maybe thats causing the temps to go up and down ?

not too much, i think it's also just because the prime p isn't that good of a vrm

 

but a fan should help a lot

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801139
Share on other sites

Link to post
Share on other sites

15 minutes ago, Brent744 said:

Yes I believe that to be your VRM's (VR). Those temps should still be fine. I used to have a B350M (AM4) board and the system wouldn't crash until my VRM's were hitting 77C.

The frame drops wouldn't have anything to do with your VRM temps. It can be caused by a number of different things. I would monitor your cpu and gpu utilization percentage. I used to have a Ryzen 7 1700 and while playing PUBG the chip would randomly downclock itself while under heavy load, causing a significant drop in frames.

Does the drop in frames happen to a number of different applications or only one?

77c on VRM causes crashing?  That just sucks.

"Do what makes the experience better" - in regards to PCs and Life itself.

 

Onyx: Ryzen 7 7800X3D / Gigabyte B650 AORUS Pro AX / ASRock Taichi 7900xtx OC / G. Skill Flare X5 6000CL36 64GB (4x16GB) / Samsung 980 1TB x3 / Super Flower Leadex V Plat Pro 1000 / EK-AIO 360 Basic w/ Silent Wings fans / Fractal Design North XL (black mesh) / LG - UltraGear 45" OLED QHD 240Hz / Mackie CR5BT / SteelSeries Arctis Nova Pro / Cherry MX Board 3.0 / Logitech G502 - https://valid.x86.fr/my9nnr

 

7800X3D - PBO +200, CO -30 all cores, 4.90GHz all core, 5.05GHz single core, Cinebench 23: 18401 multi, 1779 single

 

Khaleesi: Ryzen 5 5600X3D (+200, -30) - ASRock B550M Pro4 - G. Skill Ripjaws V 16GB 3200CL16 - Asus Prime 9060XT 16GB - Samsung 980 1TB + Crucial MX500 1TB - Cudy AX3000 PCIe Wifi 6 - EVGA SuperNOVA 650 P2 - Thermalright Frozen Notte RGB 360 White V2 - NZXT H6 Flow RGB White - LG 34" 3440x1440

 

NAS/Plex/Game Server  Ryzen 9 5900XT 16c/32t - Gigabyte B550M AORUS Elite AX - TeamGroup T-Force Vulcan 64GB 3200CL16 - MSI 1050Ti 4GB - Crucial P3 Plus 500GB + TeamGroup MP44L 2TB (Game) + WD Red Plus 4TBx2 (Plex) - TP-Link AC1200 PCIe Wifi - EVGA SuperNOVA 650 P2 - Thermalright Peerless Assassin 120SE - ASUS Prime AP201 - Currently Hosting: Enshrouded x2, Hytale, Icarus, Windrose. Project Zomboid, Dune Awakening.

 

Sage: Ryzen 7 7800X3D (+200, -30) - Gigabyte B650 Gaming X V2 - ASRock Steel Legend 7900GRE - G. Skill Flare X5 32GB 6000CL32 - TeamGroup MP44L 2TB - Super Flower Leadex Platinum SE 1000w - NZXT H5 Elite

 

Emma: i9 9900K @5.2Ghz - Gigabyte Z370 AORUS Gaming 5 - MSI 6900XT Gaming X Trio - G. Skill Ripjaws V 32GB 3200CL16 - 750 EVO 512GB + 2x 860 EVO 1TB (RAID0) - Super Flower Combat FG 850w - Thermaltake Water 3.0 Ultimate 360 - Fractal Design Define R6 - TP-Link AC1900 PCIe Wifi

 

GF Rig: Steam Deck 512GB OLED, Vizio 43" 4K TV

 

Extra parts: ASUS 6650XT - Gigabyte 1080Ti - Cooler Master Q300L - Gigabyte 450w PSU - Super Flower Leadex V Plat Pro 850w

 

OnePlus Ecosystem: 

OnePlus 11 5G - 16GB RAM, 256GB NAND, Eternal Green. OnePlus Watch 2 - Radiant Steel, OnePlus Buds Pro 2 - Eternal Green

3D Printing: 

Bambu Lab X1 Carbon, AMS, AMS2 Pro (thank you MicroCenter!)

Other Interesting Tech:

- 2021 Volvo S60 Recharge T8 PHEV Polestar Engineered - 415hp/495tq 2.0L 4cyl. turbocharged, supercharged and electrified.

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801143
Share on other sites

Link to post
Share on other sites

1 minute ago, LukeSavenije said:

not too much, i think it's also just because the prime p isn't that good of a vrm

 

but a fan should help a lot

I  will try that then at the end of the month when the mulah comes xD and see if it helps , thank you very much for taking your time to help me im very apreciated :)

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801146
Share on other sites

Link to post
Share on other sites

1 minute ago, IIGodlikemode said:

I  will try that then at the end of the month when the mulah comes xD and see if it helps , thank you very much for taking your time to help me im very apreciated :)

no problem

 

and if you don't mind, we always appreciate some likes?

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801151
Share on other sites

Link to post
Share on other sites

3 hours ago, LukeSavenije said:

no problem

 

and if you don't mind, we always appreciate some likes?

hehe done , i pushed my cpu to 4.8 ghz now the vrm temps are at 72 and cinebench my cpu gets up to 79 max mostly 72-74 c , when gaming it spikes up to 69 c are those temps safe ? 

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801722
Share on other sites

Link to post
Share on other sites

Just now, IIGodlikemode said:

hehe done , i pushed my cpu to 4.8 ghz now the vrm temps are at 72 and cinebench my cpu gets up to 79 max mostly 72-74 c , when gaming it spikes up to 69 c are those temps safe ? 

yeah, that's fine

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801724
Share on other sites

Link to post
Share on other sites

Just now, IIGodlikemode said:

nice , got a good boost of performance ive allways been kinda scared whenever my temps went above 60 xD now here i am at 79 max when stresstesting haha

once again thank you for your time :D

no problem

 

have fun though

Link to comment
https://linustechtips.com/topic/1093200-help-with-vrm-temps/#findComment-12801732
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×