No display on first boot

[Matlac]

Hello i recently decided to build a new computer due to me moving house the specs are here:

 

APU: Ryzen 3 3200g

MOBO: Gigabyte ga-b450m-ds3h 

RAM: Hyper X Fury 3200mhz ddr4 (1x8Gb)

PSU: Corsair CX450M

 

When i start my computer everything turns on, all fans are spinning motherboard leds work but i get no signal on my monitor, i made sure everything was in where it is supposed to go i checked every cables the 8-pin for the APU the 24 pin mobo, cpu fan, the ram is clipped into place and tried every slot of ram.

 I don't have the little motherboard speaker because i am using an old case so i can't hear if there are any errors. I am using a hdmi cable for the monitor, tried dvi with another monitor still no success. 

 

Some help would be greatly appreciated, thanks.

[Fasauceome]

Have you tried ram in a different slot? move it one slot to the right, then all the way to the right if that doesn't work.

[Matlac]

4 minutes ago, fasauceome said:

Have you tried ram in a different slot? move it one slot to the right, then all the way to the right if that doesn't work.

Yes i have tried every slot

[Joescalon]

Does your motherboard have errors/boot codes? Ryzen 3000G CPUs do need the new bios update to actually work and won't boot without it, generally you'll get a CPU error from motherboard.

[Frenzter]

Try removing the processor and put it back again after a few seconds. Also put the ram on second slot

[Rede]

May I know if this issue was resolved ? I am also facing same issue tried all option's suggested above but no luck