I7700K OC HELP

[Surreals]

Hi guys,

 

i have a i7700k cpu and a H100i cpu cooler.

 

I have my 7700k OC to 5ghz 1.35v 

 

my temps at 10 percent load are around 55-

My temps on prime 95 full stress are around 80-87 

 

i know this is high i have just recently today used thermal paste again after been recommended to re thermal my cpu and its made a slight difference but do i either tune it down as the H100i may not be able run 5ghz properly or is the H100i potentially faulty?

 

Any advise would be highly appreciated cheers 

[Mister Woof]

In p95 at full load anything under 90 is fine imo

[_Aontaigh_]

31 minutes ago, Plutosaurus said:

In p95 at full load anything under 90 is fine imo

Anything under "TJunction", 100°C in the case of the i7-7700K, is fine and especially so in the case of Prime95.

 

People get way too anal over temperatures when it comes to degradation or damage, current is the real killer.

 

I would recommend using Prime95 v 26.6 due to it not supporting newer instruction sets such as AVX which never versions use making them basically nothing more than an extremely unrealistic power virus: https://www.mersenneforum.org/showthread.php?t=15504

 

37 minutes ago, Surreals said:

Hi guys,

 

i have a i7700k cpu and a H100i cpu cooler.

 

I have my 7700k OC to 5ghz 1.35v 

 

my temps at 10 percent load are around 55-

My temps on prime 95 full stress are around 80-87 

 

i know this is high i have just recently today used thermal paste again after been recommended to re thermal my cpu and its made a slight difference but do i either tune it down as the H100i may not be able run 5ghz properly or is the H100i potentially faulty?

 

Any advise would be highly appreciated cheers 

 

What temperature is the processor after five or so minutes loaded in the operating system without launching anything?

[Surreals]

52 minutes ago, _Aontaigh_ said:

Anything under "TJunction", 100°C in the case of the i7-7700K, is fine and especially so in the case of Prime95.

 

People get way too anal over temperatures when it comes to degradation or damage, current is the real killer.

 

I would recommend using Prime95 v 26.6 due to it not supporting newer instruction sets such as AVX which never versions use making them basically nothing more than an extremely unrealistic power virus: https://www.mersenneforum.org/showthread.php?t=15504

 

 

What temperature is the processor after five or so minutes loaded in the operating system without launching anything?

 

The temp after 5 mins is about 50-55.