Corsair iCue case fan curve

[mellow37]

Hi all!

 

I recently built a new PC and was having some issues where the 2 corsair LL120 fans would rev up and down. They are connected to a Commander Pro so after some reading I saw that the default iCue curve profiles are based on CPU temp and it might be the case that if the temp jumps 2-3 degrees, the fans speed up and then back down as it drops. It was happening every 5-10 seconds and was very annoying, so instead I set it to be based on my GPU. I was wondering if I should leave it based on GPU temps and if yes, what curve should I set? The fans go up to 1500 rpm and the GPU seems to be quite cool, while CPU temps are 50C while idle (I will replace thermal paste and reseat the cooler in the next few days).

 

i9-9900k

2080ti

H115i (only intake for the entire case, fan in front of rad pushing air through it and into the case)

2x LL120 fans as exhaust, top and rear