Issues overclocking with Ryzen Master

Swes · February 5, 2019

Having issues with overclocking using ryzen master on a R5 2600 non X sku. If I only turn on XMP and get the mem up to 3000 I get about 1280 cine bench with the processor at 3.7GHz ish. Decent amount of room for improvement there I'd say so I play around and soon I realize that some of the cores arent going to the speeds I set. Usually they end up at around 3.3-3.4 regardless of the setting unless its lower. The other cores are fine and will go to the set speeds. I get reduction in my CB score and the actual frequency shows up in HWI.

I'm on a gaming 7 MB with a 360 rad so all the cooling and MB I should possibly need for the measly 6 core and Ive tried as much as 1.45 volts and set the LLC to turbo and still seem to have issues. Anyone have a similar issue happen or know what I should play with in BIOS. I tried turning off C states and a few other things to no effect. Its almost like when you OC Pascal and it trips some sort of OCP and forces frequency down.

I'm