no display Pc boots, no display.

[Aljaz]

Im having a problem, so my pc is one month old and I know it’s should be working properly...every time I turn it off and then turn it on can’t get monitor to display....this is my second time getting this. First time I resetted CMOS and it worked fine then but I want it to work with no hardware resetting...is possible that PSU is not working properly?

[benji_]

could be gpu not working properly. resit it and make sure the power cables on either end are firmly pushed in with no cracks in the rubber coating. also try a different display cable as it might be broken

[Aljaz]

Can u explain better I’m not an expert about hardware...my gpu is brand new like 5 days old before I had R5 2400g iGPU... @benji_

[Aljaz]

I checked the cables from the PSU to the PCIE end that goes to GPU and same thing. 

[Aljaz]

Use different HDMI cables same problem...

[Aljaz]

The fans are spinning on the gpu so gpu is getting power....

[benji_]

Is the gpu pushed into the slot enough? have you installed the drivers? is your display cable connected to the gpu?

[Aljaz]

Yes 8 pin connector is connected (properly), gpu is fully inside pcie slot (x16)

and the drivers are installed. As I said gpu itself is running normally no loud fan spinning ,normal gpu but just not displaying...i can get it working by reseting the cmos but with the first shut down, reset, sleep.... no picture. @benji_