Jump to content

I need a AFFORDABLE 600 ohm headphone amp or audio interface for my new beyerdynamic dt 990 pros black edition. I have looked everywhere and only found a very expensive Soundblaster X7. I think optical output is the best and I can’t find one with that type of connections. I need your help and I have a question. What’s the best audio connected RCA or Optical? Anyways thanks for your help if you find a 600 ohm audio interface or amp for me I love you. 400- CAD

Link to comment
https://linustechtips.com/topic/1022347-amp/
Share on other sites

Link to post
Share on other sites

  • 2 weeks later...
On 1/17/2019 at 1:32 AM, Sniperman0914 said:

I need a AFFORDABLE 600 ohm headphone amp or audio interface for my new beyerdynamic dt 990 pros black edition. I have looked everywhere and only found a very expensive Soundblaster X7. I think optical output is the best and I can’t find one with that type of connections. I need your help and I have a question. What’s the best audio connected RCA or Optical? Anyways thanks for your help if you find a 600 ohm audio interface or amp for me I love you. 400- CAD

Have a look at the Audioengine D1 - its a dac, converts an optical in to twin rca outputs, then an amp for 240 dollars. https://www.amazon.com/Audioengine-D1-24-bit-Digital-to-Analog-Converter/dp/B006IPH5H2/ref=sr_1_3?ie=UTF8&qid=1548521767&sr=8-3&keywords=Audioengine+D1

LTT's Resident Porsche fanboy and nutjob Audiophile.

 

Main speaker setup is now;

 

Mini DSP SHD Studio -> 2x Mola Mola Tambaqui DAC's (fed by AES/EBU, one feeds the left sub and main, the other feeds the right side) -> 2x Neumann KH420 + 2x Neumann KH870

 

(Having a totally seperate DAC for each channel is game changing for sound quality)

Link to comment
https://linustechtips.com/topic/1022347-amp/#findComment-12234454
Share on other sites

Link to post
Share on other sites

On 1/17/2019 at 1:32 AM, Sniperman0914 said:

I need a AFFORDABLE 600 ohm headphone amp or audio interface for my new beyerdynamic dt 990 pros black edition. I have looked everywhere and only found a very expensive Soundblaster X7. I think optical output is the best and I can’t find one with that type of connections. I need your help and I have a question. What’s the best audio connected RCA or Optical? Anyways thanks for your help if you find a 600 ohm audio interface or amp for me I love you. 400- CAD

Thats everything you would need -> https://www.amazon.com/gp/cart/view.html/ref=attachSidesheet

LTT's Resident Porsche fanboy and nutjob Audiophile.

 

Main speaker setup is now;

 

Mini DSP SHD Studio -> 2x Mola Mola Tambaqui DAC's (fed by AES/EBU, one feeds the left sub and main, the other feeds the right side) -> 2x Neumann KH420 + 2x Neumann KH870

 

(Having a totally seperate DAC for each channel is game changing for sound quality)

Link to comment
https://linustechtips.com/topic/1022347-amp/#findComment-12234456
Share on other sites

Link to post
Share on other sites

I recommend https://us.creative.com/g6/?gclid=Cj0KCQiAp7DiBRDdARIsABIMfoC0r0GABfVRoK5bVg8dRK-kb53t9Q-kqnoh5GxGky96rr4dy1A-uD8aAmR6EALw_wcB

 

Its $150, handles 600 ohms, sounds as good as my Schitt stack, has multiple inputs and lets you listen to PC and device audio at the same time, decodes Dolby Digital on the optical input for better movie/console audio. I'm quite happy with it.

Link to comment
https://linustechtips.com/topic/1022347-amp/#findComment-12234587
Share on other sites

Link to post
Share on other sites

"600 ohm" for amplifiers is a purely marketing term that carries no physical meaning. Virtually every voltage amplifier on the market will perform better into higher impedance loads; the real question is what sort of voltage swing the amplifier can handle into a higher impedance load. The X7 does 6.5Vrms; the Schiit Magni does around 11Vrms. Getting a 600Ω DT990 to 100dB requires about 1.3Vrms.

 

Technically any consumer amplifier can handle "arbitrarily high number" ohms; otherwise they wouldn't work without a load connected.

Link to comment
https://linustechtips.com/topic/1022347-amp/#findComment-12234786
Share on other sites

Link to post
Share on other sites

6 hours ago, Sniperman0914 said:

what am i supposed to see here lol?

image.png.09d68001aecc6cec7eff6ddbb3ba5654.png

LTT's Resident Porsche fanboy and nutjob Audiophile.

 

Main speaker setup is now;

 

Mini DSP SHD Studio -> 2x Mola Mola Tambaqui DAC's (fed by AES/EBU, one feeds the left sub and main, the other feeds the right side) -> 2x Neumann KH420 + 2x Neumann KH870

 

(Having a totally seperate DAC for each channel is game changing for sound quality)

Link to comment
https://linustechtips.com/topic/1022347-amp/#findComment-12256415
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×