Jump to content

First time updating bios.

Go to solution Solved by Master Disaster,

Nah, with bioses you can always jump straight to the latest version.

Hello, i have a gigabyte Z370XP SLI which i want to update but dont know how should i update it. what i mean by this is my bios version is at F5 currently on the gigbytes website theres a bios version upto F11 so should i update me bios from F6 to F11 one by one? or can i just update to F11 and get all the older updates with it?

 

https://www.gigabyte.com/Motherboard/Z370XP-SLI-rev-10#support-dl-bios

Link to comment
Share on other sites

Link to post
Share on other sites

Nah, with bioses you can always jump straight to the latest version.

Main Rig:-

Ryzen 7 3800X | Asus ROG Strix X570-F Gaming | 16GB Team Group Dark Pro 3600Mhz | Corsair MP600 1TB PCIe Gen 4 | Sapphire 5700 XT Pulse | Corsair H115i Platinum | WD Black 1TB | WD Green 4TB | EVGA SuperNOVA G3 650W | Asus TUF GT501 | Samsung C27HG70 1440p 144hz HDR FreeSync 2 | Ubuntu 20.04.2 LTS |

 

Server:-

Intel NUC running Server 2019 + Synology DSM218+ with 2 x 4TB Toshiba NAS Ready HDDs (RAID0)

Link to comment
Share on other sites

Link to post
Share on other sites

Make sure you are using a ups or are closely watching the pc the whole time tho and making sure no one unplugs it or turns it off

PC: CPU: i5-9600k - CPU Cooler: be quiet! Dark Rock Pro 4 - GPU: Sapphire Radeon RX 5700 XT 8GB GDDR6 - Motherboard: ASRock - Z370 Extreme4 - RAM: Team - T-Force Delta RGB 16 GB DDR4-3000 - PSU: Corsair - TXM Gold 550 W 80+ Gold Certified Semi-Modular ATX Power Supply - Case: Thermaltake - Core G21 TG

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, lmeneses said:

Make sure you are using a ups or are closely watching the pc the whole time tho and making sure no one unplugs it or turns it off

This isn't 1998 my dude, the days of bad flashes killing boards are long gone (assuming your board cost more than $40).

 

I mean, I wouldn't recommend killing the power mid flash but chances are more than good that if that did happen your board would either recover itself or you'd have the ability to reflash it using usb flashback.

Main Rig:-

Ryzen 7 3800X | Asus ROG Strix X570-F Gaming | 16GB Team Group Dark Pro 3600Mhz | Corsair MP600 1TB PCIe Gen 4 | Sapphire 5700 XT Pulse | Corsair H115i Platinum | WD Black 1TB | WD Green 4TB | EVGA SuperNOVA G3 650W | Asus TUF GT501 | Samsung C27HG70 1440p 144hz HDR FreeSync 2 | Ubuntu 20.04.2 LTS |

 

Server:-

Intel NUC running Server 2019 + Synology DSM218+ with 2 x 4TB Toshiba NAS Ready HDDs (RAID0)

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Master Disaster said:

This isn't 1998 my dude, the days of bad flashes killing boards are long gone (assuming your board cost more than $40).

  

I mean, I wouldn't recommend killing the power mid flash but chances are more than good that if that did happen your board would either recover itself or you'd have the ability to reflash it using usb flashback.

That is true, but I mean, I still wouldn't take the risk lol

PC: CPU: i5-9600k - CPU Cooler: be quiet! Dark Rock Pro 4 - GPU: Sapphire Radeon RX 5700 XT 8GB GDDR6 - Motherboard: ASRock - Z370 Extreme4 - RAM: Team - T-Force Delta RGB 16 GB DDR4-3000 - PSU: Corsair - TXM Gold 550 W 80+ Gold Certified Semi-Modular ATX Power Supply - Case: Thermaltake - Core G21 TG

Link to comment
Share on other sites

Link to post
Share on other sites

The question is... do you need to update it?

 

well it already has the F5 anyway so things couldn't get worse... last decent version for those boards was the F3, the one before the infamous patch that killed 10% of coffee lake single core performance

ASUS X470-PRO • R7 1700 4GHz • Corsair H110i GT P/P • 2x MSI RX 480 8G • Corsair DP 2x8 @3466 • EVGA 750 G2 • Corsair 730T • Crucial MX500 250GB • WD 4TB

Link to comment
Share on other sites

Link to post
Share on other sites

35 minutes ago, lmeneses said:

Make sure you are using a ups or are closely watching the pc the whole time tho and making sure no one unplugs it or turns it off

will it take alot of time?

 

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, Venomous468 said:

will it take alot of time?

 

Depends but usually not that long

PC: CPU: i5-9600k - CPU Cooler: be quiet! Dark Rock Pro 4 - GPU: Sapphire Radeon RX 5700 XT 8GB GDDR6 - Motherboard: ASRock - Z370 Extreme4 - RAM: Team - T-Force Delta RGB 16 GB DDR4-3000 - PSU: Corsair - TXM Gold 550 W 80+ Gold Certified Semi-Modular ATX Power Supply - Case: Thermaltake - Core G21 TG

Link to comment
Share on other sites

Link to post
Share on other sites

OP - I updated my BIOS two weeks ago from an old rev to a new rev - I HATE the changes.  Havent had time to roll back - this is GREAT ADVICE RIGHT HERE:

 

23 minutes ago, aezakmi said:

The question is... do you need to update it?

 

 

My temps are wonky (higher) my autoclock is lower, all kinds of things I hate about it.  Just a thought!

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Wifes Rig: ASRock B550m Riptide, Ryzen 5 5600X, Sapphire Nitro+ RX 6700 XT, 16gb (2x8) 3600mhz V-Color Skywalker RAM, ARESGAME AGS 850w PSU, 1tb WD Black SN750, 500gb Crucial m.2, DIYPC MA01-G case

My Rig: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Daughter 1 Rig: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) Patriot Viper CL14 2666mhz RAM, Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case. 

https://www.3dmark.com/3dm/37004594?

Daughter 2 Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire Nitro+ R9 Fury Tri-X, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case

 

Link to comment
Share on other sites

Link to post
Share on other sites

36 minutes ago, Venomous468 said:

will it take alot of time?

 

I think any modern Z370 motherboard updates BIOS not more than 10minutes.

I updated my Z370 motherboard just right after I took it out of the box when I first boot it up just to stay on track with the lattest fetures like compatibility to run the Intel 9th gen CPUs, the whole BIOS updating process was brief enough..

My system specs:

Spoiler

CPU: Intel Core i7-8700K, 5GHz Delidded LM || CPU Cooler: Noctua NH-C14S w/ NF-A15 & NF-A14 Chromax fans in push-pull cofiguration || Motherboard: MSI Z370i Gaming Pro Carbon AC || RAM: Corsair Vengeance LPX DDR4 2x8Gb 2666 || GPU: EVGA GTX 1060 6Gb FTW2+ DT || Storage: Samsung 860 Evo M.2 SATA SSD 250Gb, 2x 2.5" HDDs 1Tb & 500Gb || ODD: 9mm Slim DVD RW || PSU: Corsair SF600 80+ Platinum || Case: Cougar QBX + 1x Noctua NF-R8 front intake + 2x Noctua NF-F12 iPPC top exhaust + Cougar stock 92mm DC fan rear exhaust || Monitor: ASUS VG248QE || Keyboard: Ducky One 2 Mini Cherry MX Red || Mouse: Logitech G703 || Audio: Corsair HS70 Wireless || Other: XBox One S Controler

My build logs:

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×