Custom loop pumo isues

[Fox7]

Hello dear all ,

 

I finaly finished my first custom loop including gpu and cpu.

The only problem so far is that i dont know how to control the pump RPM which runs at max speed.

 

My Mobo is the ASUS z370 prime - A and the pwm header of the pump is conected to the Chacis fan _1 which is supposed to be pwm according to the manual.

 

My pump is the attached one.

[COUPER MILLAR]

I personally prefer to use the CPU 1 fan header for my pump control. But that is not your question... You should be able to set a fan profile in your bios for that specific fan header to control your pump speed. 

[Fox7]

1 minute ago, COUPER MILLAR said:

I personally prefer to use the CPU 1 fan header for my pump control. But that is not your question... You should be able to set a fan profile in your bios for that specific fan header to control your pump speed. 

thank you for the reply bro,

I tried everything in bios but it doesent respond.

Will the cpu optional header work because the cpu 1 is taken by the fan hub

[COUPER MILLAR]

I would try another header just to see if its an issue with a PWM on that specific header.