Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Potato90

[MSI VEGA56 Airboost] GPU Clock Speed problem, please help

Recommended Posts

Posted · Original PosterOP

Hi everyone,

 

I have MSI vega 56 airboost for nearly 1 year and it work well for me. Yesterday I decided to repaste the thermal paste (Noctua NT-H1) to the graphic card. However after reassembly and put into the computer, start the program, GPU clock is alway maximum at 800MHz - 900MHz when fullload, despite I increased the power limit to 50%, GPU power is only maximum 100W.

Temperature are totally fine, all are bellow 50°C

Everything I reset to default, fresh window installed, up to date driver installed but nothing change. Also repaste again but no effect.

 

What is wrong with my graphic card ? Any idea to fix this?

 

My system:

Mobo: Gigabyte X370M

CPU: AMD Ryzen 5 2600

RAM: 16 GB Patriot Viper DDR4 3000

GPU: MSI Vega 56 Airboost

PSU: Corsair Vengance 650M 80plus silver

Link to post
Share on other sites

no such problem before repaste? Did you have enough paste to cover up the entire package (core and HBM)? Did you make sure all the thermal pads are covering places they did before?


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
4 minutes ago, Jurrunio said:

no such problem before repaste? Did you have enough paste to cover up the entire package (core and HBM)? Did you make sure all the thermal pads are covering places they did before?

Yes, before this I do not have problem. I think I had enough paste to cover up all the package (core and HBM) because the temperature is totally fine. GPU hotpot temperature also is just 50°C. When I reduced the thermal paste, temperature ramp up to 60, hbm around 65 and hotspot is around 80 but the GPU clock is just 800MHz - 900MHz. Afterthat, I repasted again with more thermal paste, also on the heatsink, temperature back to 50°C but the GPU core clock not change. This is strange and I don't why.

The thermal pad for VRM and Choke I kept from reference card and also correct position.

Link to post
Share on other sites
1 minute ago, Potato90 said:

Yes, before this I do not have problem. I think I had enough paste to cover up all the package (core and HBM) because the temperature is totally fine. GPU hotpot temperature also is just 50°C. When I reduced the thermal paste, temperature ramp up to 60, hbm around 65 and hotspot is around 80 but the GPU clock is just 800MHz - 900MHz. Afterthat, I repasted again with more thermal paste, also on the heatsink, temperature back to 50°C but the GPU core clock not change. This is strange and I don't why.

The thermal pad for VRM and Choke I kept from reference card and also correct position.

what kind of full load is that? Furmark?


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
1 minute ago, Jurrunio said:

what kind of full load is that? Furmark?

I tested with uniengine valley, superposition 1080p extreme and also Shadow of Tomb Raider without Vsync. All of them clock GPU is just run around 900MHz. HBM clock is fine, I overclocked to 900MHz and then have effected in game and benchmarks.

Superposition 1080p extreme normally I get 4200 point with power limit +50%

Now I get just 2300 @@.

Link to post
Share on other sites
6 minutes ago, Potato90 said:

clock is fine, I overclocked to 900MHz and then have effected in game and benchmarks.

so overclock it more to its usual speed?

 

I guess the vbios just corrupted itself, you can try flick the bios switch and get onto its slave bios. If that solves the problem, your masterr bios has bugged out.


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
4 minutes ago, Jurrunio said:

so overclock it more to its usual speed?

 

I guess the vbios just corrupted itself, you can try flick the bios switch and get onto its slave bios. If that solves the problem, your masterr bios has bugged out.

I tried to set the state 7 (1622MHz) in Wattman is Minimum State, GPU clock just jump around 900MHz.

 

I just test the 2nd bios, nothing change, GPU clock is the same, around 900MHz, GPU power draw is around 100W.

I just think maybe I screw too tight when re-assembly but I saw the core, there is no crash or broken.

Link to post
Share on other sites
Just now, Potato90 said:

there is no crash or broken.

too late at that point

 

1 minute ago, Potato90 said:

I tried to set the state 7 (1622MHz) in Wattman is Minimum State, GPU clock just jump around 900MHz.

does it say its throttling reason? Maybe your system power plan is set to somthing meant to save power? (I know Ryzen Master has one but dont know if Radeons have their equivalent).

 

Also make sure Radeon Chill is disabled.


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
27 minutes ago, Jurrunio said:

does it say its throttling reason? Maybe your system power plan is set to somthing meant to save power? (I know Ryzen Master has one but dont know if Radeons have their equivalent).

 

Also make sure Radeon Chill is disabled.

I checked all of them. Everything is correct setting with high performance power plan. I will reassembly it once again and look for some scratch or brocken on the PCB board. Hope that this is not hw issue.

Is that okay if the thermal paste go around the small capacitors and ICs around GPU core, or I need to clean all of them?

Link to post
Share on other sites
36 minutes ago, Potato90 said:

Is that okay if the thermal paste go around the small capacitors and ICs around GPU core, or I need to clean all of them

usual pastes arent electrically conductive, so no you dont have to clean them. It is recommended though because clean is better to the eyes.


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Buy VPN

×