Search the Community

Heyy There How ya'll doin todaaaay when simple Video Cards costs more than first Soviet Union car Well here i have an issue with motherboard that i have ordered from web market... It does not show any video signal, not even showing BIOS. when i turn it on it sounds 4 BEEPS and after that just a black screen. Motherboard Model: BTC-T37 What i have tried to do? I tried to CLR_BIOS for reset it ... Does not work! Tested RAM on my laptop to see if it's works or not, RAM was worked fine on my laptop btw it has to open bios with or without RAM. Removed CMOS Battery for about 1 min then turned on again and still same thing!! could someone help me plz????

I have an AOC 24G2U that I bought for about 2 years ago, and it worked perfectly until now. For a long time I have used most of the USB-ports in the back to power various peripherals and I never considered that there might something like a power limit,so I recently added some LED-strips and didn't seem like a problem at first. Monitor worked fine as usual and the led strips lit up as well. But after a couple minutes of use it suddenly blacked out (There was no pop or such a thing). I responded by unplugging everything and tried it by itself in another outlet... but it was dead. No image, no light and no power led or such. My guess is that something broke on the inside from the exceeding power draw by the USB-hub? Maybe a capacitor or something blew up. My question here is if there is something I could try to fix this? I don't really have the money to buy a new monitor and this really sucks. Any and all help is highly appreciated.

First of all hello to everyone, this is my first post although I've been subscribed to Linus for years. As the title says, sometimes when I turn on my PC I just get, well, nothing. It looks like everything is running, the BIOS makes that little beep, but there's no picture. This happens maybe once every two weeks. When it happens I just press that I/O button on my PSU a couple of times, and it boots normally. You can say I've found a solution, but I don't know what is causing it. If something is failing, it would be better to know what it is. GPU, PSU, bad voltage? I'm lost guys. PC specs are: ASUS M5A78L-M AMD FX-4320 AMD R7 360 Kingston 2x4GB DDR3 RAM Hitachi HDD 500GB LC Power 500W Running on updated Win10 Also, I noticed some time ago that my speakers are making a low humming noise. You can't really hear it unless you put your ear on the speaker, but it's still weird.

Hi, I have a problem. When i connect VGA or HDMI cables from my laptop to a samsung S24B300 monitor I get no picture. The monitor is working, it's been tested with another laptop with the same cables and it instantly displayed the picture. Any help wouls be appreciated.

I helped a friend to transfer his pc into a new case. Everything went perfect but when we tried to turn it on, there was a problem. All the fans turned and the RGB lights went on but the display showed nothing. There isn't a Asus logo on boot and neither a Windows one. We tried anything: swap display/cable, swap ram and so on. Can you help us fix the issue?

Okay so have my first build all ready to go, p106 as a graphics card, getting ready to os this beast. i could see my bios just fine for a few boots. i had some issue and needed to get back into bios before i could install ubuntu on this os less pc, but now i can only get to the error in the installer. i think what happened is, the bios is forcing itself through the graphics card as when i take out a bootable medium, and or spam f2 no picture. so how can i access the bios again? my system specs are •8086k @4.0 ghz/stock •p106 innotec3d/axle •Z390 taichi ultimate • Cooling : 2 pre installed case fans, Mugen 5 rev b its fan, and thermal grizzly paste. • Case: Focus G • 1tb Samsung 860 evo • OS: Soon to be ubuntu with unity de • Corsair vengence 2400 @ 2193 (Stock) • 750 watt corsair psu gold

Hello all, Introduction / Description: So this is my first build, I bought an Asus Tuf Gaming X570-Plus and everything was working great until after I had installed windows. This is when I went to relocated the computer to update it using the Ethernet cable, I placed on ground and moved cable from back of monitor and when I connected it no display, I am thinking to myself what the F it was just working. I moved back to the other room and noticed a white LED on the VGA light, and a green LED on the Boot Light, After doing some research online, I was informed that this may have been a bad mobo, but I feel that its not the mobo, being my 1st build I dont have anything to test with to narrow down the factors. Now when I plug the power on turn on the fans spins slow and the orange light comes on for Ram, after 2-3 seconds of that that the red light comes on for CPU, after like 2-3 seconds that light it changes to the VGA that is when all the fans kick on at a higher rate, the Lower fan on the mobo stops spinning and the after about 5 seconds a green light is on for the LED and it basically sits there for a while unitl i press just 1 time on the power button and the system shuts down completely. Components AMD RYZEN 7 3800x - CPU Asus Tuf Gaming X570-Plus - Motherboard radeon rx 580 gts - GPU (2) 16gb 3200 Vengence - DDR4 Ram Corsair CX650W Powersupply 2TB Seagate 3.5 Barracuda - SATA HDD 1TB Crucial - SSD Troubleshooting: I had removed the GPU - Radeon rx 580 gts I removed the Ram sticks I tested each Ram Bay to see if that is the issue and the light came on every time I re-seated all the cables by removing and re-placing (Not replace as swapping out but replace as take out and plug back in) I have not RMA the Mobo but I feel that may be my next step as this is a headache, after some research online i seen that this issue is with alot of people and that the board is basically a bad board :-( just my luck. Any suggestions would greatly help, Thanks in advance. IMG_8918[1].HEIC

2 days ago i built my new pc but now i have got a problem. on the first start all was ok but it hasnt showed any picture. the beep code is 1 long 2 short beeps looping. also the led on my mainboard is orange/yellow My PC specs: Intel Core i7-7820X Asus ROG Strix X299-E Gaming nVidia Asus Geforce GTX 1070 OC 16GB G.Skill Triendt Z 4133mhz

Hi, my friends were moving and they have this fairly recent LG TV but I no longer works so they were just going to throw it away. But if power is off at the picture is there and it's a 4K LG TV so I was wondering if I could fix. When I power it on all I get is static and the left half the of the screen is a color usually red yellow green or purple but the entire screen has static. I was wondering if it's one of the boards inside if so how would I diagnose it when I plug something in via USB I get power but it's not displaying anything the remotes not bringing up menus. The only thing the remote does is it can raise lower the volume and turn on and off the TV. Could it be fixed or is it tract?

Hello everyone So I'm in a bit of a pickle. Last night I had the brilliant idea of changing the thermal paste that came with my processor with a higher quality one. So after spending half an hour cleaning the old one from my processor I put the new one, mounted the cooler, plugged everything back on and started my pc. Fans started turning, mobo doing its rbg dance, everything is fine except the fact that my screen is getting no signal from my pc. Just blinking in stand by mode. When I plug the HDMI to my mobo instead of graphics card, the screen goes to perpetual blackness, like its working but there's nothing showing. Typing in password logs me in to Windows because my razer keyboard goes from cycling to the costume color scheme, but still nothing on the screen. So after some tinkering and magic I managed to get bios shown and it does not read my m.2 ssd which is where my windows are, but when I go to boot order the ssd is there, however trying to boot from it results in the 'insert boot able thingy' message. I started reinstalling windows and in the step where you pick where to install them my ssd is once again shown, but trying to install windows on it after formatting results in the installation process just stopping half way through (when it's setting up last steps). I don't know what to do anymore. Is my ssd dead? It's less than a year old and worked perfectly until last night. My pc specs are: Mother board: msi z170a gaming carbon pro Graphics card: Nvidia Gtx 1070 Processor: Intel I5 6600k Ram: G. Skill Ripjaws V F4 16gb Ssd: Samsung 960 evo 500gb

Recently my while using my computer I was screwing around watching three movies on all three of my monitors (context not important) when my computer froze but unlike a normal freeze the screens went black and did not come back on. Tried all the obvious things, (windows d, Ctrl alt delete etc) but the screens remained black while the actual computer seemed fine, fans were still spinning, LEDs were all on. I resorted to holding down the power button for a forced restart but when I tried turning it back on again there was still no image while the computer was fine, including postcodes, something I did not check at the time of original error. This was about 2 hours ago and I have left it for a while, tried using onboard graphics, unplugged my monitors, plugged them back in to different ports on my GPU, checked the input on the monitors. Just tried again with onboard graphics and managed to get a picture. My computer no longer acknowledges the presence of my GPU and I have no idea what I can do. When I try and boot with the display cables plugged into the GPU the, Boot_Device_LED comes on, something that does not occur when booting on onboard graphics. If anyone has any ideas or tips they can give me PLEASE help, I am freaking out about what to do... System is custom, with parts as follows: 4790k CPU GTX 980 GPU Asus z97 Pro (WiFi AC) Motherboard EVGA supernova 750w PSU Custom water cooling loop

My problem Yesterday my computer worked just fine. Two monitors connected to my GTX 980 and all was well. Until today. My main monitor (Asus VG248QE) was just disabled and my second monitor monitor was used as primary instead. What I have done: My computer seems to detect both my monitors ("1" is connected via Display Port and "2" via HDMI) I cannot enable it in "Screen resulotion". So I tried in the nVidia Control Panel, but no luck. I went to "Set up multiple displays" and saw both monitors. But I can only place a check-mark once and I have limited time to "apply" the settings. After that I cannot enable it, but if I "apply" it in the short time room, everything goes black and I have to restart my PC. Help I am out of ideas and before I try and RMA the card, I thought I would ask for some help (I have tried googling my problem here.... well, I guess you figure out how that went) If I have left any useful info out, just ask and I'll see if I can inform you.

I recently built an APU desktop machine for my dad. Everything works wonderfully except that the screen will black out about 5 minutes after bootup. The screen will then turn on after 3 seconds. Then, half a minute later, it would black out again. The screen blacks out exactly 3 times before it is fine again. I figured that this was a driver issue, but that didn't resolve the issue. The monitor is conected to the motherboard via a vga cable (monitor is pretty old). The APU is the A8-6600K and the motherboard is the MSI FM2-A75MA-E35. Does anyone have an idea for what is going wrong? I feel like it is something that is digitally controlled since the blackouts are pretty consistent with the run time of the computer.