Bibo

http://www.kingston.com/datasheets/KHX16C9B1BK2_8.pdf This is the data sheet for her Ram, its approved for CL9-9-9-24 with 1.65v @1600mhz, its most likely auto configured its self at 9-9-9-24 with 1.5V @ 1333mhz so just bump up the ram speed to 1600mhz and check for stability with memtest, if this fails bump the RAM voltage up to 1.65v

Hi can you elaborate on why you dislike corsair?

Just an update, I ended up getting a "Reeven RC1204", which is basically a horizontal CM 212 and i put a SP120 PWM fan on-top i did have to move a stick of ram over to the 3rd slot, so I am now populating slot 3 and 4 so only running in single channel mode. however i haven't noticed any performance difference. Around 3mm space between heatsink and 3rd dimm, but heatsink has room under for low profile dimms. Around 10mm from side panel fan and heatsink fan. Fits like a Glove :D Temps are down from 70~ degrees gaming to 40, should see a very small improvement when Artic silver TIM settles in (Y)

I have never really looked at the 1155 Xeon's but this is honestly amazing, do you loose support for XMP/higher RAM speeds?

Hey Guys, Yesterday i started getting these weird artifacts while playing any full screen game with SLI turned on, I don't have any pics but it was basically a red outline between any sort of color difference, so things like gun detail and clouds were highlighted red. After searching around for a solution I found that it could be the SLI cable, well the contact between the cards. sure enough after taking it off and on again a few times to make sure there was no debris or anything interfering with the contacts it fixed my problem. Hope this helps anyone who has a similar problem :)

They are looking to sell them on there website http://www.corsair.com/us/ i'm not sure there whereabouts or for how much or if there event up yet :(, I have been inquiring about this kit for a long time and every time the release date just keeps getting pushed further and further back. As for other PSU's on the corsair line, i'm honestly not sure, since the 2013 edd of the GS come out they have been talking about putting out color schemes.

Ok thanks for pointing me in the right direction (Y)

Thanks for the Suggestion, I found a video by Skratchwiz_PC on YT which shows it would fit quite nicly (hes using the Rampage 4 GENE, i have the 5 GENE so i assume it will fit) with the heatpipes toward the RAM, (i don't plan on adding any more RAM) Also TTL did a view on this cooler and rated it really well (Y)

I have posted the maximum dimensions in the first post. Sadly its too tall, I already have one of these kickin' about ;)

I believe you will be able to control the fan speed within the bios, not sure about a 3rd party app, 3pin work off undervolting the fan, the problem with this design is some fans need a starting voltage of 5-7volts so if the profile is set too low some fans wont start (just twitch). However PWM pulses 12volts to lower the speed, this means you don't lack the start up voltage but can easily control the fan speed, I believe the 4th pin on PWM controls a transistor to pull the current straight to ground bypassing the fans motor. so a PWM fan is essentially a 3pin fan with a transistor to add PWM support. This diagram shows a digital waveform, the top would represent 12volts being supplied to the fans motor while the low part would represent 0 volts, pulsing this type waveform many thousands of times a minuet makes for a seamless fan speed at various speeds depending on the duty cycle.

The NZXT Vulcan doesn't support these coolers, the two top 120mm fans are right up to the mobo, the VRM heatsink would obstruct. Thanks though :)

Its a 92mm rear exhaust, I have seen people wiggle the tubes between the 3.5" cage and GPU and mount it at the front but i'm not too keen on this idea

Hey guys, I'm a little stuck with choosing a good CPU cooler, I am looking for a good heatsink to keep my CPU cool and maybe give some headroom for OC'ing. I have; CPU: intel Core i7 2600k Mobo: Asus Maximus V GENE RAM: Corsair Vengeance (high profile) Case: NZXT Vulcan I am currently using the intel stock cooler. These are the dimensions i have to stay within Max height for the case 130mm (because i have 35mm thick side fan installed) http://www.nzxt.com/product/detail/36-vulcan Rear fan mount is 92mm here is a picture of my rig; I have looked at coolers such as the CM TX3 (92mm verson of the CM hyper 212) but this is too tall, the CM GeminII S524 which doesn't have clearance for RAM, unsure if it would mount due to heat-pipes if rotated 180 degrees. I have also looked at the Asetek 545LC, which is a 92mm version of the Corsair H70, but I haven't found any decent reviews on its performance. I would like a top down style heatsink so it would get the advantage of having the side fan blowing down on it. Any recommendations would be much appreciated.

Yeah (Y) I have to say your build looks a lot cleaner than mine, I pretty much gave up with cable management since there was next to no room on the back of the mobo tray and with the PSU being non-modular

oops, there only dual slot cards (Asus 560ti)

He means the 2700k/2600k (same chip just binned differently), It honestly depends on what you intend to use it for, if you have a nice Z77 mobo and a 3rd gen PCI-E capable GPU and you plan on going SLI then deffo get the 3770k. however you can save a little bit of money by buying the older generation sandy bridge set up and invest the money saved else were. Personally I would wait to see what Haswell has to offer (4770k) or get the 3770k. As for overclocking you get around the same performance out of both sandy and ivy if you have adiquet cooling, ivy doesn't generally overclock as high but has higher Calc/Clock. Hope this helps

Thanks man :) The top GPU is being pushed down because i have a SSD in the lower 3.5" bay with a right angle Sata-data cable slightly pushing down on it. its slightly exaggerated because of the angle of the photo :P

Hey guys, Today I got a little package in the mail from corsair; Contained in it was a red and white color scheme for there new 2013 GS series of Power supply's :D Here is an official picture i was emailed by corsair while inquiring about this; So yeah... this is what my rig looks like with the stock blue stickers and band on; and this is after :wub: What do you guys think?

I think its great Gigabyte are also including a motherboard to pair with this processor :D GL guys