fcemiliano

Finished project looks great. You should add a couple of the Star Wars action figures inside of the case, it would add to the theme.

Yea ideally that's where I want to put it so it could be shown off in all of its glory but, right now that is the only spot where I can mount my SSD and HDD.

Thanks for this, Powercolor makes a 290X with a waterblock preinstalled for $700; overall it will save me about $50 http://www.newegg.com/Product/Product.aspx?Item=N82E16814131568

Planning my next build Hey Guys I'm having a hard time deciding what parts to put into my new computer. I'm going to be reusing some of my components from my current build in this build to save some cash. I have a budget of $2500 for everything I'm hoping the parts will cost less so I can get some games or a new keyboard. All the parts that are highlighted in red mean that they have to be in the build; other than that all the other parts are open to being changed. I'm going for a black and red build, so keep that in mind please. CPU: i7-4770k Motherboard: Asus Maximus VI Formula Anything Black and Red, I just picked this Asus board because it looks beautiful RAM: ADATA XPG V1.0 16 (2x8GB) Downloadfreeram.com It's RAM so it mehh GPU: Asus R9 290X-DC20C PowerColor LCS AXR9 290X (Waterblock Pre-installed) *Credits to Dragoon20005 I'm gaming at 1440p and AMD graphic cards tend to preform better at higher resolutions. But if you guys think a nVidia card is better please suggest it. But also remember if you change the GPU please remember I have to change the GPU waterblock as well. If you have a suggestion for any GPUs with pre-installed waterblocks that look nice please suggest those too. Case: NZXT H440 I want to be able to see my reservoir and idk how I'm going to do that with the HDD cover on the H440. Any suggestions where to put the pump/res? Storage: Samsung Spinpoint M8 1TB 2.5" Samsung 840 Pro 256GB (From Current Build) I'm not sure but I believe if I put a 360mm rad in the front of the case I can't put any 3.5" HDD in my computer, so I am forced to use 2.5" laptop HDDs PSU: NZXT Hale82 V2 700W For the PSU I need something with clean cables, I don't want to sleeve them myself or spend $70 for the custom cables that Corsair makes for their PSUs. Cooling: PrimoChill PrimoFlex Advanced LRT Tubing 3/8"ID x 1/2" OD - Bloodshed Red XSPC G1/4" Thread 3/8" ID x 1/2" OD Low Profile Compression Fitting - Black Chrome XSPC Photon 170 Tube Glass Cylinder Reservoir / Pump Combo I'm not sure where I want to put the Pump/Res because I want to be able to see it. So if you have a suggestion on where I should put it, that would be great or; you can just suggest a different pump and res. XSPC RayStorm High Performance Acetal CPU Liquid Cooling Block If you like a different CPU Block suggest it EK MSI / Gigabyte Radeon R9-290X VGA Liquid Cooling Block Rev 2.0 If you have a suggestion for any GPUs with pre-installed waterblocks that look nice please suggest those too. EK R9-290X DCII VGA Liquid Cooling RAM Backplate (EK-FC R9-290X DCII Backplate - Black) Just need a clean backplate Radiators: For the radiators the H440 can fit a 360mm or 280mm at the top and the front can fit the exact same sizes. Please suggest where you think I should put the radiators. XSPC EX360 Triple 120mm Low Profile Split Fin Radiator Any 360mm Rad that will fit Alphacool NexXxoS UT60 Full Copper Dual 120mm Radiator Any 240mm Rad that will fit

Excited to see how all these amazing parts will come together

The matching whites will look so good

Those rounded edges look so nice

The suspense is killing me, just want to see the final product

Its a breath of fresh air for the computer, looks so much better.

Clean up those cables (Maybe some zipties?) and that ghetto mounted G10 made me giggle a little.

The red color scheme is going to look beautiful

My SGS4 need a replacement

I cannot use the 5.25" drive bays because I am going to be putting my storage there. Sorry if I made it sound like I didn't want / like them; I actually meant people could offer up any solutions to my problem. I already looked at the Swiftech 220, but the problem would be that the run for the front of the case would be a little to long, and I rather not have to mess with the tubing and fittings.

I just ordered a Corsair 350D and a 780 today. I am looking to watercool both my 780 and 3770k(Already Own). I have 240mm rad that I am planning to put in the top of the 350D; also I'm going ordering a Alphacool UT60 by the end of this week. The problem that I am having is I'm having trouble finding Pump/Res is SMALL enough to no interfere with other parts. It can't be a bay reservoir because that is where I am going to put my SDDs and HDDs. I was thinking about a Aquacomputer Pump Adapter w/ Aqualis Reservoir and Pump (Link to it at the bottom); but it might be too tall. So, if I could please have your input on a pump and reservoir I would be much appreciative. Also, it could be a pump/res combo or just a pump and a reservoir. http://www.frozencpu.com/products/16994/ex-res-422/AquaComputer_Pump_Adapter_w_Aqualis_Reservoir_and_Pump_Installed.html?id=dXQ4Hj8v&mv_pc=1299