ZeroTwoIsMyWaifu

I have no idea I only changed the Multiplier from the CPU itself. Haven't changed anything on ram ect.

ahh okay unfortunetly I don't have any multimeter. Northbrige frequency is at 3199,3mhz

Don't worry about to many questions all fine I checked the Rails 12v, 5v and 3,3v line with HWInfo (under load) I wish I had any other PSU laying arround. to be honest I only do CPU Tests where my GPU is not 100% needed. I don't know a lot about PSUs I only know the Volatages should stay as close as posible to their Rails. I'm not even sure if the CPU and GPU use the same Voltages it might sound weird i'm sorry Could you help me and explain that Jumper trick never heard of it I'm sorry . The only Error I could find is called Failure 1002.

Thank you They have asked me to check : Caps ,RAM,PSU, socket, BIOS version. And try with Xeon - Tested the sticks together not alone. - I haven't found any dead pins on the socket - Bios is at version F4 released 22.04.2015 - Yes I checked the capacitors if anyone is opened or leaking

Yes and no! My windows is about 1 month old reinstalled it because I had the wrong version installed oops. Anyway its not Windows based because I've never had the issues with my Xeon before all work fine so it must be a OC issue. Also Windows is fully on the newest version but Thanks for the respond

Heyho lovely Forum, before I'm writing anything more I have to say sorry if didn't understood all I'm not a native english speeker I apologise. okay let's start with my big issue I bought a Pentium G3258 for 10$ used and It got never OC'd. I managed to OC it to 4,5ghz with a Z97N Gaming 5 from Gigabyte at 1.444V, 16gb DDR3 1600mhz G.Skill Trident X. Cooler Master 212X, Be Quiete 500W PSU 80+ Bronce can't tell the exzact model number but its an older model, GTX970 Gaming G edition and my lovely iiyama Prolite XB3270QS 32Inch WQHD Monitor. I swaped out my main CPU (Xeon E3 1231 v3) to have a fun time while oc and while that my bad time began. I began to have such a bad time while booting. I'm getting when I'm shutting down the pc Black screens and I have to Reset the Cmos battery to manage it to boot. The Xeon which officialy supports DDR3 1600 can't boot with 1600 I have to Downgrade it to 1333mhz to have it booted and even on 1333 I have to Clear the Cmos battery to get a boot. I wrote with some people who helped me already but don't know the issue or they are out off idea. The last advise I've got was to make a Thread in this forum. Things I already done which didn't helped : - Memtest86 - try to boot with @stock speed - Checking dead pins - Bios updating - Checking of Damaged condensators If you have any more Advice or help I appreciate it Greeting