MarkCRO

I am writing this to warn all users of Palit RTX3090 graphic cards if VRAM Tj temperatures are around 105 C, DO NOT open that card to remove pads if you dont have 0.75 mm soft pads around, not an 0.2 over that thicknes of 0.75 it is that sensitive when assembling back.
 
All temps are on overclocked GPU, closed case and  intense gaming
 
I had to open 6 times to set it right only with 1mm very soft pad, at first, then there is diferent thicknest pads inside, 1mm, 1.5mm and i think 3mm.
I have managed to lower VRAM from 106 c to 95 c
BUT GPU was on 89c with MX-5 paste ( it is not the paste fault or assembling )
Tried with other 1 mm pads and GPU was overheating....
Opened again and again then decided to compress softer pads from 1mm to 0.8 rough, after that VRAM is on 95 max and GPU is on 77 max my question is this good temperature for RTX3090?
A was frustrated for 2 days...
 
If card has rock solid stable 105 c and fans not ramping DO NOT open card let it run, change backplate pads, mine was like sand.
 

OK, first THANK YOU ALL for replaying and helping, it was voltage, it was Auto, and next to it 1.38, so i thout it was fixed, and newer checked voltages on monitoring sofw. my bad.
 
Vcore was @ 1.656 V
 
Temperatures now are 75 c , stress test and OC to 5.1 GHZ
 
CREDITS TO Boyohan and all you guys.
 
Next, connecting Corsair Pro Commander and playing with ICUE.
 
I will close this as answer
 
 
 

Dear Colin, i have been testing LinusTechTip equalizer settings on my Logitech G935, Battlefield V, RainbowSix Siege, and some of mine surround settings, and i can tell you guys headset got a lot better in sound quality, high tones come to life, middle are clear and bass is normal now.
 
So give it a try.