TheRonen

That's what I did, thank you, it's very expensive to fix this issue, it's not worth it, thanks

Do you think it will work?Hello everyone, I have a PlayStation 3 slim console CECH 2004B model whose disc drive stopped working and stopped reading discs from time to time, I opened the device, cleaned the disc drive from the inside, including the Blu-ray Lens, but the problem does not go away, the drive reads discs and then stops reading them, there is a spinning noise but nothing appears on the screen, you have to insert the disc a few times for it to work I searched the net for replacement disk drives and this is what I found, https://www.amazon.com/Module-Replacement-CECH-2001A-KEM-450AAA-KES-450A/dp/B07Z17RQZT/ref=d_pb_allspark_dp_sims_pao_desktop_session_based_sccl_2_2/143-7778711-9210749?pd_rd_w=hYMbW&content-id=amzn1.sym.6b5008ac-c24a-4aea-a3ea-015a531184f5&pf_rd_p=6b5008ac-c24a-4aea-a3ea-015a531184f5&pf_rd_r=H151D5K7PY46HQTP7JQK&pd_rd_wg=eYfWO&pd_rd_r=ecd33ddf-53e6-47b6-b535-784a0ce6474a&pd_rd_i=B07Z17RQZT&psc=1#customerReviews https://www.amazon.com/Module-Replacement-CECH-2001A-KEM-450AAA-KES-450A/dp/B07Z17RQZT/ref=d_pb_allspark_dp_sims_pao_desktop_session_based_sccl_2_2/143-7778711-9210749?pd_rd_w=hYMbW&content-id=amzn1.sym.6b5008ac-c24a-4aea-a3ea-015a531184f5&pf_rd_p=6b5008ac-c24a-4aea-a3ea-015a531184f5&pf_rd_r=H151D5K7PY46HQTP7JQK&pd_rd_wg=eYfWO&pd_rd_r=ecd33ddf-53e6-47b6-b535-784a0ce6474a&pd_rd_i=B07Z17RQZT&psc=1#customerReviews Do you think it will work? thanks !

I think they do, it will take a lot of time,

I'll do that, thanks

any idea how to do it without using another amd cpu ? i dont have one or know someone who owns one

i think i know what the problem is, this board support this CPU from bios ver 1401 and the board came with 0305 ver, i dont see any other option to update the bios via usb without cpu, any ideas ?

that's what i hoped for, but nope, tried VGA, DVI and HDMI and still tha same, onboard and GPU this CPU have an onbard gpu so i pluged the cable to the onboard HDMI/DVI/VGA

hey no bent pins, this board does not have any LED to indicate any problems, and the pc stays on, no loop, stays on and no display

Hey guys, I have a problem with a new computer I built, its my first time Ryzen PC and I have a strange problem that I did not have with Intel, The computer turns on, the fans turn on but I get no signl error on 2 diffrent screens I tried : 1. Check that I have connected all the power cables from the power supply to the board, everything is connected 2. I reset BIOS, no help 3. I checked with another power supply, not helping 4. I checked only to be sure that the board and processor are compatible, yes they are 5. I connected some external video cards but still no display on the screen 6. tries posting with one ram sticlk, same PC Spec : Mobo : Asus Prime A520M-A CPU : Ryzen 5 5600G RAM : 32GB 2 sticks PSU : 650W Anyone have any ideas?

After a week I realized which component causes heating power supply, the 2080s I have with this video card a problem of overheating and it would have somehow affected the power supply, I replaced the card and the problem disappeared

i know, it's so frustrating, ill try pluging the pc directly to the wall and see what happends

tried that, nothing i dont think thats the problem either, i discconected everything and its still blazing hot

web browsing and idle (windows desktop) You're right about the extension cords, I'll find a solution to that Is there a way to fix this setting in a gigabyte Z590 BIOS?

Hello guys I have a problem that my power supply heats up very much with minimal load, this is not a heat which can cause a burn but a heat at a fairly high level but not dangerous I wanted to know if the problem is with my power supply so I took another power supply from the same model and the problem happened again, I tried a third power supply from another computer where the problem does not exist and put it on my computer but the problem happened again. I connected the three power supplies to another computer and there the problem does not exist, could there be a situation where there is a load on the power point where the computer is sitting and so it happens ? Or is there some other problem? Note that the computer is connected to an extension cord that is connected to an extension cord due to the fact that there are three computers in the room but one power point psu models : Gigabyte P850GM X2 Brand new Gigaybte P750GM Brand new thanks in advance !

can you reccomend a good thermal pads that can fit this card model ?