Jump to content

Xkillerpn

Member
 View Profile  See their activity

  • Posts

    632

  • Joined

  • Last visited

 Content Type 

Everything posted by Xkillerpn

  1. Xkillerpn
    If you play at 1440p or 4k dont worry about it really . Fps will still be good.
  2. Xkillerpn
    There was a bug on the inicial cards not passing 1350mhz clock. Try changing the bios to something else if its not under warraty . If it is I think you need to send it to RMA.
  3. Xkillerpn
    Cristall Ball , please tell us
  4. Xkillerpn
    That navi needs a power mod bios . Max powah
  5. Xkillerpn
    Get the rx590 is cheaper and has 8g vram. See the xfx fat version. Some games eat the 8g vram . Don't worry about the drivers they are good.
  6. Xkillerpn
    Dont use anything over 3800 set flk speed to half of this. Ok now you can prob put cl16 at these speeds and will improve performance. Ryzen loves speed and low latency.
  7. Xkillerpn
    you can get them on ebay. have a look
  8. Xkillerpn
    Look on the board or manual normally says the primary slots
  9. Xkillerpn
    Thats some low scores on stock. On my x370 and 3900x I do 7300 stock, I have a loop with a ek block. With all day OC of 44.50 44.50 43.50 43.50 and 1.365v on load 1.30v I have max 73c and 7800 on cine 20. I have less temps with the oc then stock.
  10. Xkillerpn
    You need to try another PSU, also put the 2 8 pin cabbles on it to the gpu.
  11. Xkillerpn
    SLower ram always on the primary slots , then put xpm and thats it.
  12. Xkillerpn
    Try another PSU or try using both 8 pin cables not just one.
  13. Xkillerpn
    RX580 will be the max gpu to pair with the fx cpu. Now if you plkay at 4k you can put a better gpu but at 1440p and 1080p there is no point.
  14. Xkillerpn
    Distiled water and mayhams Blitz kit and when all clean distiled water + Mayhams Biocide. Never had an issue with this.
  15. Xkillerpn
    So you can mix sticks for example 2x4 + 2x8 from diferent brands and speeds but the slowest ones need to be on the primary slots they will take command of the other ones , this works without an issue. Now mixing 1 stick with a diferent stick thats a diferent story. Better to just get 2x 8g and cheap one will do just get a 3000mhz one.
  16. Xkillerpn
    Hello, is your card ie molded or unmolded? If unmolded its normal there are diferences in the HBM and die that causes that.
  17. Xkillerpn
    Dont repair just get another one. Try to get a Saphire or a xfx one the OC ones
  18. Xkillerpn
    Maybe , cleaning always help.
  19. Xkillerpn
    if you play battle realms you just won 5 points clean the drivers with ddu get most up todate drivers also clean the dust will help
  20. Xkillerpn
    By steps 1 - Get a better PSU 2 - then upgrade sorry but change that fire hazard, best advice I can give
  21. Xkillerpn
    Get this one, its a nice cooler, I had it on my rx 480 and max temps was like 50c , really nice cooler. Be aware that there will be no fan stop, its a very quiet cooler. Also on the original cooler of your card you can try the washer fix and you can run your card with chill on , put it as the refresh rate of your monitor i dont know like 48 to 144 or 40 to 75. I use it with my watercooler vega and it does work great.
  22. Xkillerpn
    If you dont want RGB go with Artic, they are cheap and they are with the best.
  23. Xkillerpn
    by steps CMOS Update bios Check if the vrm is not to hot Try another PSU Change board, I dont think its the board
  24. Xkillerpn
    It can work and on load not have power for all of the stuff.
  25. Xkillerpn
    ok so normally thats a PSU gone bad, try another one
×