Androkiller
-
Posts
39 -
Joined
-
Last visited
Recent Profile Visitors
882 profile views
Androkiller's Achievements
-
but pfblocker will do it for the whole network there are extensions where you can just add block list for the ip ranges i am sure ublock origin had the feature where you could add custom lists, not sure now as i switched to brave as my webrowser look at pfblocker doc as it shows the lists https://docs.netgate.com/pfsense/en/latest/packages/pfblocker.html#available-lists this one will be of most interest for you probs https://www.iblocklist.com/lists.php?category=country In brave you can add custom lists by default
-
pfsense + pfblocker now laugh when you see bots portscanning you from the russia getting blocked and many more options.....
-
create a separate SSID only for 5GHz leaving your original one untouched so that it will broadcast with the same frequencies and therefore should not be splitting your current SSID, unless your AP/router cannot support then out of ideas
-
rgb still on when pc is off
Androkiller replied to Marcelo Valerio's topic in CPUs, Motherboards, and Memory
I had this issue but now with a latest update of the AmouryCrate the device page just doesn't load and now cant turn off. Anyone know what config file applicable to turning off the the lighting effect, i haven't found anything in the C:\Program Files\WindowsApps\B9ECED6F.ArmouryCrate_2.6.14.0_x64__qmba6cd70vzyy but could be wrong and thinking the config is in C:\ProgramData\ASUS -
stop default route creation ubuntu 1804
Androkiller replied to Androkiller's topic in Linux, macOS and Everything Not-Windows
ok think its ok now but dont know how to do it for static assigned interfaces https://askubuntu.com/questions/1042582/how-to-set-default-route-with-netplan-ubuntu-18-04-server-2-nic following that thread it looks to be ok when both are DHCP assigned interfaces dont understand how to apply it for static assignments -
I got a ubuntu server running with 2 NICs. The issue i have is it keeps creating a default route for the secondary NIC every week and changing the metric on the default route i want it to use which knocks off all web sites. Any ideas how to stop it?
-
I acquired a Inno3d 1080ti (dual fan one) but was not so impressed in the cooling on it. So thinking of getting a NZXT g12 with a H55 but I have a Corsair 380t, so i limited on the height the gpu can be found out that you can get away with a card being 140mm in height (http://forum.corsair.com/v3/showthread.php?p=788961) but i don't know what the height will be once the NZXT be mounted. Anyone with a reference PCB know the height with the NZXT mounted?
-
You got a thread on this i plan to use a pFsense but running on a VM on my server but if i can get it on a PI then would prefer to lower power consumption?
-
Arghh it's a unique connector for that gen of server 655915-B21
-
It's defo not standard displayport. It's on the front of a HP proliant dl360e
-
What is this connector? My display port cable won't fit cos the notch is the wrong way up and the inner hub/pin is shaped like an i not like a u
-
OK so i have a HP Proliant DL360e G8 I have installed windows onto a SDD and it is connected using the CD drive sata connection and is listed as disk 5, i also have a HDD in the drive bays which can be listed as disk 1-4. The issue i am having it that the bios seems to not find the boot partition when the HDD and SSD are connected. If i disconnect the HDD then it boots. So i have looked in bios to see if i could select the boot options by disk, but this was not possible makes me wish i had a dell bios now. So my plan is to get a usb and have the boot partition on it and then i can change the boot order to boot from the internal usb first. The issue i have is how do i go about making a boot partition on a USB which will load my os?
-
I found a workaround you have have to do a calibration of the fans first then the it will decide what the lowest value can be, it isnt great but atleast it my fans arent super loud. @WoodenMarker typing nor plus -/+ do the trick. If the value is not above the calibrated lowest then you cannot change it.
-
Does any have a ROG board and uses the bios settings to control the fans? The issue i am having is i cannot define the lowest duty cycle for a fan, if i enter a value which is lower than defined it just changes back to the value. I have be left very confused and dont understand how to overide this. Please dont recommend AI Suite the version which comes with the board for me just fails to work and is buggy. PS its not my pic but looks exactley the same.
-
I dont think a patch to the driver will be done, the creator i believe stopped development to it years back. So i guess .......... RIP Speedfan
