-
Posts
61 -
Joined
-
Last visited
Reputation Activity
-
DBUndeR got a reaction from ShaunOfNintendo in t r o o p e r │ arctic white 760T › X99 › custom hardline › pastel blue #FIN
Do you put your HDD in the optical drive bay?
-
DBUndeR reacted to ToroddWold in Project Sleipnir
Painting the plate
Finally got the waterblocks and backplates
seems like they have had problems getting them in stock since the launch of the 980ti (EK using titan x blocks for 980ti)
I don't like that EK chose to go this route, the TITAN X engraving bothers me more than it should... :wacko:
soon I can paint the case
I carbon fiber wraped the MOBO plate I made, still need to make the wires for 2 GPUs and finish the midplate
Still lots of work left..
but it sure is funn
-
DBUndeR reacted to F3nixMods in The F3nix MS1.1 Desk scratch build
Hi there guys, been a while since my last update but I'm back with quite a bit this time. Hope you enjoy it...
Cabling will definitely be a pain in this case an pretty much all cables will have to be made of a specific length, to assist with the cable/hose management I have decided to create some custom cable and water cooling hose clips.
Here you can see some of them just before having the bottom edge sanded
Before and after...
The hose clips ready to be drilled so that I can fit the threaded inserts
...and with the inserts in place.
All nice and cosy already in the desk and with same of the cables in place
Have decided to go with the Bitfenix spectre pro fans due to the ease of turning the leds on/off. However, not before giving it a bit of a F3nix twist
With the nice Silverstone fan dust filters in place. Many thanks to Silverstone once more, they are really of a great quality and near enough invisible when in place!!!
Can see some of them in place here...
Worked on the back oak panels and the result was this
On one of my previous post I've shown you the F3nix headset holder, some of you asked to see a picture of it with the headset in place and here it is, hope you like it
I've also started assembly of the internal and external panels and the below pictures illustrate pretty much where I am with the build at the moment...
Spot the F3nix
Hope you like the update and will be back soon with some more.
Mod on!!!
-
DBUndeR reacted to IMCustoms in Project Ultima [Build log]
Hey guys, forgot about this build??
Icemodz.com finished and sent cables, so I'm waiting them to arrive and I can finally start assembling everything on the wall
-
DBUndeR got a reaction from SwickedV in Project The X Desk | The X Room [100%?] More updates to come!
From the outside it probably looks like the red light district.
-
DBUndeR reacted to Deblow in Project Alternate 4K Build "COMPLETE"
In this update Iv done the final MDF primer & white primer coats on the whole of the desk,
Cut the MB tray & added a 200mm fan to the base of the desk
MDF primer
The standard PC case tray
3 big holes made in line with the fan that will be directly under the MB tray
Cut for the 200mm fan
heres the desk after the full primer, still lots to do in preparation for the paint
Heres a shot with the glass on
Should have some photos of the final finish im looking in the next update, soon as this has been done the desk will be ready to come
inside the house for the internal components & modding to continue
-
DBUndeR got a reaction from Hasle in t r o o p e r │ arctic white 760T › X99 › custom hardline › pastel blue #FIN
That looks very nice!
-
DBUndeR reacted to Deblow in Project Alternate 4K Build "COMPLETE"
I now have the final fans needed for the RADs & desk,
Silencio FP 120 (Black) RADs
MegaFlow 200mm (Red LED) Desk
Jetflo 120 (Red LED) Desk
Im going to be cutting holes in the base of the MB tray & instaling the 200mm fan directly underneath,
This serves 2 purposes, keep the MB cool & the main reason was to get positive air pressure in to the desk.
In total I will be having 6/7x120mm & 1x200mm IN, 6x120mm OUT.
I will try get this done by the weekend and show you some pics, but for now heres some other bits iv been working on.
Hinges fitted, but will need some adjusting before painting..
Lifts up perfectly, resting flat against the angled shelf & speakers
-
DBUndeR reacted to Random_her0 in [Build Log] Vulpes - Parvum Systems S2.0 Custom Acrylic Tubed Watercooling mATX PC
Changes are coming
-
DBUndeR reacted to AMD Lover in Vanilla Ice (750D) In-Progress
Take some regular RAM, write on it with a sharpie what kind you want, stick it in the ground and sprinkle some miracle grow on it and water.
-
DBUndeR got a reaction from zacRupnow in Project The X Desk | The X Room [100%?] More updates to come!
From the outside it probably looks like the red light district.
-
DBUndeR got a reaction from MeltyMoon in CPU too hot after enhancing airflow?
I reapplied it today and it's working very good! thnx! I'm probably able to overclock a little higher. The rising of the temperature goes very slow.