Intel burn test ram issue

[edge33]

Hi,

My machine is the following:

PCPartPicker part list / Price breakdown by merchant

CPU: AMD - Ryzen 5 1600 3.2GHz 6-Core Processor
CPU Cooler: Corsair - H115i PRO 55.4 CFM Liquid CPU Cooler
Motherboard: Asus - STRIX B350-F GAMING ATX AM4 Motherboard
Memory: G.Skill - Ripjaws V Series 16GB (2 x 8GB) DDR4-3200 Memory
Storage: Samsung - 850 EVO-Series 250GB 2.5" Solid State Drive
Storage: Samsung - 850 EVO-Series 250GB 2.5" Solid State Drive
Storage: Seagate - BarraCuda 1TB 3.5" 7200RPM Internal Hard Drive
Video Card: Gigabyte - GeForce GTX 1050 Ti 4GB Windforce OC Video Card
Case: Fractal Design - Meshify C Dark TG ATX Mid Tower Case
Power Supply: EVGA - SuperNOVA G2 650W 80+ Gold Certified Fully-Modular ATX Power Supply
Case Fan: Noctua - NF-F12 PWM 55.0 CFM  120mm Fan
Generated by PCPartPicker 2018-03-26 10:44 CEST+0200

 

I enabled D.O.C.P profile on the mobo, and I set rams to 3200Mhz. I tried to run intelburntest to test my temps, and I have been able to pass 10 cycles ad standard level.

If I re-run the same test again as soon as it finishes, the programs stops saying my system was found unstable after two or three passes. This does not happen if I set rams to 2066mhz.

 

The question Is, How do I test if my system is stable when OCing rams?

[themctipers]

memtest

 

if it passes a overnight, run windows/games/do whatever at 3200mhz.

 

 

who cares if intel burn test breaks your system if nothing else does?

[edge33]

23 hours ago, themctipers said:

memtest

 

if it passes a overnight, run windows/games/do whatever at 3200mhz.

 

 

who cares if intel burn test breaks your system if nothing else does?

 

Thank you for your feedback.

 

UPDATE: Tests I am doing:

1) Memtest

2) IBT for several runs with 10 standard cycles.

 

So far:

1) Memtest at 3200 got 4 errors after 40 min

2) Memtest at 3100 got Zero errors after 8 hours (10 passes)  -> Ibt failed only once after 10 runs with 10 standard level cycles each.

 

I am still worried about IBT. Can I try to give a step of dram voltage?

 

[JacobFW]

6 hours ago, edge33 said:

 

Thank you for your feedback.

 

UPDATE: Tests I am doing:

1) Memtest

2) IBT for several runs with 10 standard cycles.

 

So far:

1) Memtest at 3200 got 4 errors after 40 min

2) Memtest at 3100 got Zero errors after 8 hours (10 passes)  -> Ibt failed only once after 10 runs with 10 standard level cycles each.

 

I am still worried about IBT. Can I try to give a step of dram voltage?

 

Make sure you don't have any monitoring software running on your computer while you're testing.  I'd also recommend exiting out of any software that came bundled with your motherboard, and NZXT Cam software if you have that running.  Low level software like this can interfere with these programs.

 

I had that happen to me a while back.  Drove me nuts and took me days to figure out what it was.

[edge33]

15 minutes ago, JacobFW said:

Make sure you don't have any monitoring software running on your computer while you're testing.  I'd also recommend exiting out of any software that came bundled with your motherboard, and NZXT Cam software if you have that running.  Low level software like this can interfere with these programs.

 

I had that happen to me a while back.  Drove me nuts and took me days to figure out what it was.

I am doing all my tests running Corsair Link, Hwmonitor and IBT. I tried setting rams at 3066 and no issues anymore with IBT.

Do you think that my issues at 3100 may be caused by hwmonitor or corsair link?

 

[JacobFW]

1 minute ago, edge33 said:

I am doing all my tests running Corsair Link, Hwmonitor and IBT. I tried setting rams at 3066 and no issues anymore with IBT.

Do you think that my issues at 3100 may be caused by hwmonitor or corsair link?

 

Don't know.  Just saying that it has happened to me.