Wonky PSU PLS HELP!

[Chopsoki]

I currently have a lenovo prebuilt. I have an old case and psu and planned to transplant the mobo and everything else into the case. However, upon opening up the prebuilt I found out that it did not use a 24 or 20 pin power connector it used a 10 pin power connector. I don't know what kind of adapter I would need to buy or what type of psu to buy in order to have a working graphics card in the system. The prebuilt is a Lenovo thinkcentre 300s- 08IHH

[Guest]

On the PSU's label, does it just say it has +12V and -12V outputs and that's it?

 

 

[Guest]

Probably need this:  https://www.moddiy.com/products/IBM-Lenovo-PSU-Main-Power-24%2dPin-to-10%2dPin-Adapter-Cable-(30cm).html

 

[Chopsoki]

3 minutes ago, jonnyGURU said:

On the PSU's label, does it just say it has +12V and -12V outputs and that's it?

 

 

It says 180w, +12w and -12w and that's it.

[Guest]

Yeah.  That's a Lenovo specific PSU.  You'll need that adapter cable I linked.

 

Personally... I wouldn't bother with that mobo at all, but you do you.