8600k Build

[vyx]

So i've got a 1080 TI an 8600k and a couple ssds, and 1000 - 1200cdn left for a build.

 

was thinking :

noctua dh-15

asrock extreme 4

corsair vengeance 3200 2x 8gig

havent decide on case

evga supernova g2 750w

 

Thoughts?

 

 

 

[brob]

10 minutes ago, vyx said:

So i've got a 1080 TI an 8600k and a couple ssds, and 1000 - 1200cdn left for a build.

 

was thinking :

noctua dh-15

asrock extreme 4

corsair vengeance 3200 2x 8gig

havent decide on case

evga supernova g2 750w

 

Thoughts?

 

 

 

Don't need 750W. Take a look at G2, G3, RMx, or Focus Plus 550W - 650W.

 

Take a look at the Fractal Design Meshify C case.

[Guest]

Your system configuration has a good part selection. You dont need a 750W PSU, I suggest any corsair HX, RM or CX PSUs. In terms of the case, I'd suggest something like the Fractal design meshify C or NZXT S340 black. 

Good PSU *HERE*

Fractal design Mesify C or NZXT S340 black

 

[vyx]

Thanks @TheBeastPC & @brob

[vyx]

you guys think i should wait until black friday?

[brob]

37 minutes ago, vyx said:

you guys think i should wait until black friday?

If you are not in a rush, it shouldn't hurt. You might be able to save a few $.

[vyx]

Awesome thanks again @brob

[lukart]

On 10/11/2017 at 2:09 AM, vyx said:

So i've got a 1080 TI an 8600k and a couple ssds, and 1000 - 1200cdn left for a build.

 

was thinking :

noctua dh-15

asrock extreme 4

corsair vengeance 3200 2x 8gig

havent decide on case

evga supernova g2 750w

 

Thoughts?

 

 

 

Looks pretty good, but like said the PSU might be a bit overkill. 650w quality PSU will be enough. 

[vyx]

thanks @lukart, im still stuck on a few things, g skills ripjaw series v is like 20$ cheaper than corsairs so i may go with that. I read some posts about the extreme 4 taking higher than most other mobo voltage for a decent overclock so I may spend the extra 20$ and get a fatal1ty K6. For the case although the meshify is sexy I've always wanted to wall mount a pc so i may go for a thermaltake core p3.

 

Thanks again all for the help