Blue Snowball Problem

[EnderCat]

Ok so I am receiving my arm for my mic and I have been looking at some videos and I think my blue snowball has a part I havn't seen on others as shown in the picture and I think that might not work with my stand

 

[BubblyCharizard]

there is no image

[EnderCat]

Just now, BubblyCharizard said:

there is no image

sorry having problems one sec

 

[EnderCat]

1 minute ago, BubblyCharizard said:

there is no image

should be working now

[JahtanI]

Hey dude, I literally tied the tripod stand to the arm with some twine until I found out that my arm came out with that "connection". :

Specifically a 3/8 x 5/8 connector.

 

My problem was that the part to screw the mic to the stand was not the same size.

You problem may be different but hopefully you can refer to this video: And skip to 1:20 if you don't want to see the whole vid

 

Edited August 23, 2017 by JahtanI
Removed attatched image of "twine tripod" because It took too much space.

[EnderCat]

2 minutes ago, JahtanI said:

Hey dude, I literally did this until I found out that my arm came out with that "connection". :

Specifically a 3/8 x 5/8 connector.

 

My problem was that the part to screw the mic to the stand was not the same size.

You problem may be different but hopefully you can refer to this video: And skip to 1:20 if you don't want to see the whole vid

 

yeah I saw that but my problem is there is something sticking out that isn't in the video

[JahtanI]

1 minute ago, EnderCat said:

yeah I saw that but my problem is there is something sticking out that isn't in the video

Can you send a pic? I'm not sure exactly what you mean.

 

I didn't use any parts included tripod at all when I connected it to my arm.

Then again, I'm still not sure if the problem is the same.

 

I've seen the pic you've included too...

Edited August 23, 2017 by JahtanI
Added extra bit of info ~last line

[EnderCat]

Just now, JahtanI said:

Can you send a pic? I'm not sure exactly what you mean.

 

I didn't use any parts included tripod at all when I connected it to my arm.

Then again, I'm still not sure if the problem is the same.

I updated the post with a pic

[JahtanI]

1 minute ago, EnderCat said:

I updated the post with a pic

I see the .jpg attachments but I can't seem to open them...

 

[Dark Manor]

Find a way to remove it. It looks like a tripod broke off in your mic. 

[EnderCat]

Just now, Dark Manor said:

Find a way to remove it. It looks like a tripod broke off in your mic. 

no the tripod is intact and the piece isn't like twisting off or anything

[JahtanI]

2 minutes ago, EnderCat said:

I updated the post with a pic

I also want to clear this up now so I don't waste your time.

Did you buy an different arm/stand for use with your mic that you're trying to connect it to? I'm guessing I might've been wrong...

 

If you bought a bluesnowball mic it is supposed to come with the entirety below:

 

[Dark Manor]

3 hours ago, EnderCat said:

no the tripod is intact and the piece isn't like twisting off or anything

Is the mic used?

 

[EnderCat]

Just now, Dark Manor said:

Is the mic used?

 

yeah

[Dark Manor]

3 hours ago, EnderCat said:

yeah

That looks like a broken stand. Get some pliers and try once more. It is stuck in the tripod threads, so it's pretty safe to assume you can remove it.

[EnderCat]

1 minute ago, Dark Manor said:

That looks like a broken stand. Get some pliers and try once more. It is stuck in the tripod threads, so it's pretty safe to assume you can remove it.

ok I got it with only a few scratchs thanks

[Dark Manor]

3 hours ago, EnderCat said:

ok I got it with only a few scratchs thanks

That's what the community is for. No problem man/woman/child.

[Dark Manor]

2 hours ago, Dark Manor said:

That's what the community is for. No problem man/woman/child.

Apache Attack Helicopter