Jump to content

RAM: RAM: 24GB Hyperx Fury Black 2133MHz DDR4 (2 x 4 + 2 x 8)

Stock: 2133MHz 14-14-14-35

Overclock: 3000MHz 15-16-16-28

Two questions:

1. This this a good overclock?

2. Should I try again but this time keep my timings at 14-14-14-35 or below? I would be sacrificing frequency if I did so.

Current LTT F@H Rank: 24    Score: 10,097,484,643   Stats

Yes, I have 9 monitors.

My main PC:

OS: Windows 11

CPU: Ryzen 9 9950X

Cooler: Noctua NH-D15

Mobo: Asus ProArt X670E Creator WiFi

RAM: 96GB Trident Z Neo @6400 CL32

GPU: RTX 4090 Founders Edition, Radeon Pro WX 5100

PSU: Corsair RM1000e

SSDs: Samsung 990 Pro 4TB NVME, Samsung 970 evo plus 1TB NVME, 2x Samsung 870 evo 2TB, Samsung 860 evo 1TB, Samsung 970 evo 500GB NVME

Case: Fractal Design Define R5 Black w/ Tempered Glass Side Panel Upgrade

Monitors: 9 Monitors: Alienware AW3423DWF 3440x1440@165Hz, Acer H236HLbid 1080p@77Hz, HP D7z72AA 1080p@60Hz, Dell Inspiron 24 3459 1080p@60Hz(used only as display), Dell U2724D 1440p@120Hz, ASUS VP228 1080p@60Hz, 2x HP ZR2440W 1200p@60Hz

 

unRAID server (Plex, Backups, NAS, Duplicati, game servers):

OS: unRAID 7.1.4

CPU: Ryzen R9 3900X

Cooler: Noctua NH-U9S

Mobo: Asus ROG Strix X470-F

RAM: 64GB G-Skill Ripjaws V @ 3200MHz

PSU: EVGA G3 850W

Total Storage: Raw: 94TB, Usable: 64TB

SSD: Samsung 990 Pro 2TB NVME, Teamgroup 4TB NVME

HDDs: 4x HGST Dekstar NAS 4TB @ 7200RPM (3 data, 1 parity) + (7x Seagate Ironwolf NAS 8TB + 2x Toshiba N300 NAS 8TB in ZFS)

Case: Fractal Define 7 XL

Other: Added 3x Noctua NF-F12 intake, 2x Noctua NF-A8 exhaust, Inatek 5 port USB 3.0 expansion card with usb 3.0 front panel header

 

Link to comment
https://linustechtips.com/topic/801112-is-this-memory-overclock-good/
Share on other sites

Link to post
Share on other sites

I'd say its good, although unless you are doing heavy rendering I don't see the point in going so high with your frequency since it doesn't affect much, in some cases such as gaming it makes near no impact. If you have Ryzen then it would be suitable since that takes advantage of faster memory but Intel does not. I think the stock speeds you had would suit fine or if you want to clock then 2666mhz is what I'd say go for. Again, unless you do heavy rendering then in that case go as fast as your board supports which I think is 3400mhz 

Link to post
Share on other sites

12 minutes ago, dr lyo said:

I'd say its good, although unless you are doing heavy rendering I don't see the point in going so high with your frequency since it doesn't affect much, in some cases such as gaming it makes near no impact. If you have Ryzen then it would be suitable since that takes advantage of faster memory but Intel does not. I think the stock speeds you had would suit fine or if you want to clock then 2666mhz is what I'd say go for. Again, unless you do heavy rendering then in that case go as fast as your board supports which I think is 3400mhz 

Why is 3000MHz worse than 2666MHz? And how would I get to 3400MHz? Also I beg to differ in the case of gaming: 

 

Current LTT F@H Rank: 24    Score: 10,097,484,643   Stats

Yes, I have 9 monitors.

My main PC:

OS: Windows 11

CPU: Ryzen 9 9950X

Cooler: Noctua NH-D15

Mobo: Asus ProArt X670E Creator WiFi

RAM: 96GB Trident Z Neo @6400 CL32

GPU: RTX 4090 Founders Edition, Radeon Pro WX 5100

PSU: Corsair RM1000e

SSDs: Samsung 990 Pro 4TB NVME, Samsung 970 evo plus 1TB NVME, 2x Samsung 870 evo 2TB, Samsung 860 evo 1TB, Samsung 970 evo 500GB NVME

Case: Fractal Design Define R5 Black w/ Tempered Glass Side Panel Upgrade

Monitors: 9 Monitors: Alienware AW3423DWF 3440x1440@165Hz, Acer H236HLbid 1080p@77Hz, HP D7z72AA 1080p@60Hz, Dell Inspiron 24 3459 1080p@60Hz(used only as display), Dell U2724D 1440p@120Hz, ASUS VP228 1080p@60Hz, 2x HP ZR2440W 1200p@60Hz

 

unRAID server (Plex, Backups, NAS, Duplicati, game servers):

OS: unRAID 7.1.4

CPU: Ryzen R9 3900X

Cooler: Noctua NH-U9S

Mobo: Asus ROG Strix X470-F

RAM: 64GB G-Skill Ripjaws V @ 3200MHz

PSU: EVGA G3 850W

Total Storage: Raw: 94TB, Usable: 64TB

SSD: Samsung 990 Pro 2TB NVME, Teamgroup 4TB NVME

HDDs: 4x HGST Dekstar NAS 4TB @ 7200RPM (3 data, 1 parity) + (7x Seagate Ironwolf NAS 8TB + 2x Toshiba N300 NAS 8TB in ZFS)

Case: Fractal Define 7 XL

Other: Added 3x Noctua NF-F12 intake, 2x Noctua NF-A8 exhaust, Inatek 5 port USB 3.0 expansion card with usb 3.0 front panel header

 

Link to post
Share on other sites

I did not say it was bad, just it was pointless given the very marginal improvement you get in gaming. From the video you linked its about a 2 fps increase from 2666 to 3066 as from 2133 to 3066 its 4-5 so I can see the point in that. Also depends on the games you run, new titles take advantage more than older titles since they are designed around higher speed memory. 

 

In my opinion 2666Mhz is the sweet spot for DDR4 gaming as Intel does not take as much of an advantage as AMD with the higher frequencies.

I don't see the point cause its for benchmark scores where you notice the improvements, its barely noticable a 2 fps increase in gaming and I'd even argue up to 4 fps depending on your average fps.

Link to post
Share on other sites

31 minutes ago, dr lyo said:

I did not say it was bad, just it was pointless given the very marginal improvement you get in gaming. From the video you linked its about a 2 fps increase from 2666 to 3066 as from 2133 to 3066 its 4-5 so I can see the point in that. Also depends on the games you run, new titles take advantage more than older titles since they are designed around higher speed memory. 

 

In my opinion 2666Mhz is the sweet spot for DDR4 gaming as Intel does not take as much of an advantage as AMD with the higher frequencies.

I don't see the point cause its for benchmark scores where you notice the improvements, its barely noticable a 2 fps increase in gaming and I'd even argue up to 4 fps depending on your average fps.

So? If I can reach 3000MHz why should I only go to 2666? And that 2 FPS increase is more like 20 in some titles.

Current LTT F@H Rank: 24    Score: 10,097,484,643   Stats

Yes, I have 9 monitors.

My main PC:

OS: Windows 11

CPU: Ryzen 9 9950X

Cooler: Noctua NH-D15

Mobo: Asus ProArt X670E Creator WiFi

RAM: 96GB Trident Z Neo @6400 CL32

GPU: RTX 4090 Founders Edition, Radeon Pro WX 5100

PSU: Corsair RM1000e

SSDs: Samsung 990 Pro 4TB NVME, Samsung 970 evo plus 1TB NVME, 2x Samsung 870 evo 2TB, Samsung 860 evo 1TB, Samsung 970 evo 500GB NVME

Case: Fractal Design Define R5 Black w/ Tempered Glass Side Panel Upgrade

Monitors: 9 Monitors: Alienware AW3423DWF 3440x1440@165Hz, Acer H236HLbid 1080p@77Hz, HP D7z72AA 1080p@60Hz, Dell Inspiron 24 3459 1080p@60Hz(used only as display), Dell U2724D 1440p@120Hz, ASUS VP228 1080p@60Hz, 2x HP ZR2440W 1200p@60Hz

 

unRAID server (Plex, Backups, NAS, Duplicati, game servers):

OS: unRAID 7.1.4

CPU: Ryzen R9 3900X

Cooler: Noctua NH-U9S

Mobo: Asus ROG Strix X470-F

RAM: 64GB G-Skill Ripjaws V @ 3200MHz

PSU: EVGA G3 850W

Total Storage: Raw: 94TB, Usable: 64TB

SSD: Samsung 990 Pro 2TB NVME, Teamgroup 4TB NVME

HDDs: 4x HGST Dekstar NAS 4TB @ 7200RPM (3 data, 1 parity) + (7x Seagate Ironwolf NAS 8TB + 2x Toshiba N300 NAS 8TB in ZFS)

Case: Fractal Define 7 XL

Other: Added 3x Noctua NF-F12 intake, 2x Noctua NF-A8 exhaust, Inatek 5 port USB 3.0 expansion card with usb 3.0 front panel header

 

Link to post
Share on other sites

5 minutes ago, sazrocks said:

So? If I can reach 3000MHz why should I only go to 2666? And that 2 FPS increase is more like 20 in some titles.

If you are pushing more voltage through to get the 3000mhz then longevity.

 

What titles gain a 20fps increase?

Link to post
Share on other sites

1 minute ago, dr lyo said:

If you are pushing more voltage through to get the 3000mhz then longevity.

 

What titles gain a 20fps increase?

Do you have any evidence to support that 1.4v significantly decreases the life of the modules?

Current LTT F@H Rank: 24    Score: 10,097,484,643   Stats

Yes, I have 9 monitors.

My main PC:

OS: Windows 11

CPU: Ryzen 9 9950X

Cooler: Noctua NH-D15

Mobo: Asus ProArt X670E Creator WiFi

RAM: 96GB Trident Z Neo @6400 CL32

GPU: RTX 4090 Founders Edition, Radeon Pro WX 5100

PSU: Corsair RM1000e

SSDs: Samsung 990 Pro 4TB NVME, Samsung 970 evo plus 1TB NVME, 2x Samsung 870 evo 2TB, Samsung 860 evo 1TB, Samsung 970 evo 500GB NVME

Case: Fractal Design Define R5 Black w/ Tempered Glass Side Panel Upgrade

Monitors: 9 Monitors: Alienware AW3423DWF 3440x1440@165Hz, Acer H236HLbid 1080p@77Hz, HP D7z72AA 1080p@60Hz, Dell Inspiron 24 3459 1080p@60Hz(used only as display), Dell U2724D 1440p@120Hz, ASUS VP228 1080p@60Hz, 2x HP ZR2440W 1200p@60Hz

 

unRAID server (Plex, Backups, NAS, Duplicati, game servers):

OS: unRAID 7.1.4

CPU: Ryzen R9 3900X

Cooler: Noctua NH-U9S

Mobo: Asus ROG Strix X470-F

RAM: 64GB G-Skill Ripjaws V @ 3200MHz

PSU: EVGA G3 850W

Total Storage: Raw: 94TB, Usable: 64TB

SSD: Samsung 990 Pro 2TB NVME, Teamgroup 4TB NVME

HDDs: 4x HGST Dekstar NAS 4TB @ 7200RPM (3 data, 1 parity) + (7x Seagate Ironwolf NAS 8TB + 2x Toshiba N300 NAS 8TB in ZFS)

Case: Fractal Define 7 XL

Other: Added 3x Noctua NF-F12 intake, 2x Noctua NF-A8 exhaust, Inatek 5 port USB 3.0 expansion card with usb 3.0 front panel header

 

Link to post
Share on other sites

5 minutes ago, sazrocks said:

Do you have any evidence to support that 1.4v significantly decreases the life of the modules?

There are a number of articles which state not to go above 1.4v for daily use inorder to preserve longevity so unless you are above that I don't.

 

As for the 20fps increase I don't see it in any of the titles in the video from 2666mhz to 3000mhz, think the most I seen was 10 for a split second but the 3000mhz wasn't always getting higher, sometimes it was the same or less as it fluctuates.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×