Project Icemodz

[jojoharalds]

Hello everyone,

I recently did a Custom build for icemodz,(Custom sleeviing copmany in iceland)
Thought i share the progress with you,

hopefully you like it.

System specs:

Case - Aerocool Deadsilence Black edition

CPU:Intel 6600K
RAM:G.skill 32Gb Trident Z
MB:Gigabyte GA-Z170MX Gaming 5
PSU:1000W Thermal Take 
GPU:Asus 280x Matrix Platinum
SSD:Samsung 950 nvme

The purpose of this Build was mainly to showcase some of the products that are sold over at
http://icemodz.com

Cables,led´s,and barrow watercooling fittings and tubing.

Here are some shots of progress and in the end there will be the HD Shots of the finshed product.

Enjoy!!

First i cleaned all the watercooling gear,like gpu,radiator and reservoir,to make sure no gunk or unwanted particles are get stuck .
and then i did a testfit of the hardware so i can make the minor adjustments that where needed,
(like a cutout for the PSU)

 

 

[jojoharalds]

Getting everyting tubed up

[jojoharalds]

Getting the windows cut out,
i kept in mind to hide what i did not want to show,
like the pump on one side and the bottom compartment that houses the cables and such.

[jojoharalds]

Also for this project the customer had some custom acrylic front panel idea that really put the right touch on the build,

but not without the matt black paint ,since the glossy acrylic look would not had fitted as nicely.

[jojoharalds]

Barrow fittings ,tubing and custom icemodz sleeved cables with combs are installed

 

[jojoharalds]

And here are the final HD pictures of the fully finished build.
 

If you are interested in seeing the Project Icemodz Vol 2.

Head on over to my facebook page and follow me there. @JHPCmods

[Tech_Dreamer]

KHAJIIIT HAZ HARD'WARES