Jump to content

Hey guys,

had posted this recently:

Problem basically is, that my pc randomly does not boot, it goes past bios or sometimes goes just before showing the login screen, but then refuses to give any signal to the monitor. and more recently, it even bugged at the bios startup screen, it simply froze at that stage. Note: I changed the DP cable and nothing changed.

The gigabyte supports answer was faulty psu, he said, it might sth in the psu that does not get triggered at startup and blocks any further action, but be quiet! support basically says, when it comes that far, it is not the fault of the psu anymore (allthough they offered me to send them the psu, check it for free and eventually get a replacement unit, which I might to just to be safe, but it doesn't make sense IMHO)

Any more ideas what to check or do? Am I right with my guess on faulty or buggy motherboard?

 

Thanks for any help :) 

GUITAR BUILD LOG FROM SCRATCH OUT OF APPLEWOOD

 

- Ryzen Build -

R5 3600 | MSI X470 Gaming Plus MAX | 16GB CL16 3200MHz Corsair LPX | Dark Rock 4

MSI 2060 Super Gaming X

1TB Intel 660p | 250GB Kingston A2000 | 1TB Seagate Barracuda | 2TB WD Blue

be quiet! Silent Base 601 | be quiet! Straight Power 550W CM

2x Dell UP2516D

 

- First System (Retired) -

Intel Xeon 1231v3 | 16GB Crucial Ballistix Sport Dual Channel | Gigabyte H97 D3H | Gigabyte GTX 970 Gaming G1 | 525 GB Crucial MX 300 | 1 TB + 2 TB Seagate HDD
be quiet! 500W Straight Power E10 CM | be quiet! Silent Base 800 with stock fans | be quiet! Dark Rock Advanced C1 | 2x Dell UP2516D

Reviews: be quiet! Silent Base 800 | MSI GTX 950 OC

 

Link to comment
https://linustechtips.com/topic/728051-pc-sometimes-refuses-to-boot/
Share on other sites

Link to post
Share on other sites

Unplug any USB devices and try again.  I had a joy stick and a Thunderbolt 3 connected to my computer that would cause it to hang at code 62.  Unplugged them both an it boots fine now.

Not sure which it was (Probably the Tbolt) but it cleared the issue.

Link to post
Share on other sites

14 minutes ago, TheGlenlivet said:

Unplug any USB devices and try again.  I had a joy stick and a Thunderbolt 3 connected to my computer that would cause it to hang at code 62.  Unplugged them both an it boots fine now.

Not sure which it was (Probably the Tbolt) but it cleared the issue.

Nope, that does not work, this was one of the first things i tried

GUITAR BUILD LOG FROM SCRATCH OUT OF APPLEWOOD

 

- Ryzen Build -

R5 3600 | MSI X470 Gaming Plus MAX | 16GB CL16 3200MHz Corsair LPX | Dark Rock 4

MSI 2060 Super Gaming X

1TB Intel 660p | 250GB Kingston A2000 | 1TB Seagate Barracuda | 2TB WD Blue

be quiet! Silent Base 601 | be quiet! Straight Power 550W CM

2x Dell UP2516D

 

- First System (Retired) -

Intel Xeon 1231v3 | 16GB Crucial Ballistix Sport Dual Channel | Gigabyte H97 D3H | Gigabyte GTX 970 Gaming G1 | 525 GB Crucial MX 300 | 1 TB + 2 TB Seagate HDD
be quiet! 500W Straight Power E10 CM | be quiet! Silent Base 800 with stock fans | be quiet! Dark Rock Advanced C1 | 2x Dell UP2516D

Reviews: be quiet! Silent Base 800 | MSI GTX 950 OC

 

Link to post
Share on other sites

Does it boot every time without displayport connected?

My main computer:

i7 6700k || GTX 1070 || Asus Z170 RGB || C.M. Hyper 212 EVO || 16GB RAM || 256GB NVMe SSD || 500GB SATA SSD || 12TB total HDD || Define R5 Blackout || 850W PSU

More Details Below :) 

Spoiler

 

CPU: Intel Core i7 6700k                             GPU:  EVGA GTX 1070 FTW                                  |  Motherboard: Asus Z170 Pro Gaming Aura
CPU Cooler: C.M. Hyper 212 EVO             RAM: 16GB Kingston Fury 4x4 DDR4 2400MHz         SSD:  Intel 256GB NVMe SSD & Plextor 500GB SATA SSD

Hard Drive:  WD 2TB Black, 2TB WD Blue, 8TB WD Red     Case:  Fractal Design Define R5 Blackout Edition   PSU:  Be Quiet! Dark Power Pro 11 850W

 

Additional Computer Parts: NZXT Hue for LEDs

Peripherals: Dell U2414H (x2) || Corsair Sabre RGB || Corsair K95 Platinum || Sennheiser 558's || Modmic

 

Pictures of setup:

 

 

Link to post
Share on other sites

1 minute ago, njmyers3 said:

Does it boot every time without displayport connected?

Well never tried that, but if i now unplug it during that phase and plug it back in, signal does not come either

GUITAR BUILD LOG FROM SCRATCH OUT OF APPLEWOOD

 

- Ryzen Build -

R5 3600 | MSI X470 Gaming Plus MAX | 16GB CL16 3200MHz Corsair LPX | Dark Rock 4

MSI 2060 Super Gaming X

1TB Intel 660p | 250GB Kingston A2000 | 1TB Seagate Barracuda | 2TB WD Blue

be quiet! Silent Base 601 | be quiet! Straight Power 550W CM

2x Dell UP2516D

 

- First System (Retired) -

Intel Xeon 1231v3 | 16GB Crucial Ballistix Sport Dual Channel | Gigabyte H97 D3H | Gigabyte GTX 970 Gaming G1 | 525 GB Crucial MX 300 | 1 TB + 2 TB Seagate HDD
be quiet! 500W Straight Power E10 CM | be quiet! Silent Base 800 with stock fans | be quiet! Dark Rock Advanced C1 | 2x Dell UP2516D

Reviews: be quiet! Silent Base 800 | MSI GTX 950 OC

 

Link to post
Share on other sites

Just now, 19_blackie_73 said:

Well never tried that, but if i now unplug it during that phase and plug it back in, signal does not come either

Interesting, because I had a similar issue and a new DP cable fixed it. Which cable are you using? Also try HDMI and see how that goes.

My main computer:

i7 6700k || GTX 1070 || Asus Z170 RGB || C.M. Hyper 212 EVO || 16GB RAM || 256GB NVMe SSD || 500GB SATA SSD || 12TB total HDD || Define R5 Blackout || 850W PSU

More Details Below :) 

Spoiler

 

CPU: Intel Core i7 6700k                             GPU:  EVGA GTX 1070 FTW                                  |  Motherboard: Asus Z170 Pro Gaming Aura
CPU Cooler: C.M. Hyper 212 EVO             RAM: 16GB Kingston Fury 4x4 DDR4 2400MHz         SSD:  Intel 256GB NVMe SSD & Plextor 500GB SATA SSD

Hard Drive:  WD 2TB Black, 2TB WD Blue, 8TB WD Red     Case:  Fractal Design Define R5 Blackout Edition   PSU:  Be Quiet! Dark Power Pro 11 850W

 

Additional Computer Parts: NZXT Hue for LEDs

Peripherals: Dell U2414H (x2) || Corsair Sabre RGB || Corsair K95 Platinum || Sennheiser 558's || Modmic

 

Pictures of setup:

 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×