Jump to content

Darn Linux Mint wont boot!

Go to solution Solved by legobuilder,

Ok so I have been trying a bunch of 64bit versions of Linux. Then I try ubuntu 10.4 32bit and that worked. I thought I had a 64bit pc but apparently not... thanks for the input everyone!

So I just finished my first build and I'm trying to boot Linux mint 15 cinnamon using a disk. It boots up normally then a slowly brightening mint logo appears but then it goes to a black screen and says  BuzyBox V1.20.2 (Ubuntu 1:1.20.0-8ubuntu1) built-in shell (ash)

Enter 'help' for a list of built in commands.
 

(initramfs) unable to find a medium containing a live file system. Can anyone help?

I don't always have network problems, but when I do-

Link to comment
Share on other sites

Link to post
Share on other sites

Disable secure boot if you haven't already.

CPU: 5820k 4.5Ghz 1.28v, RAM: 16GB Crucial 2400mhz, Motherboard: Evga X99 Micro, Graphics Card: GTX 780, Water Cooling: EK Acetal CPU/GPU blocks,


240mm Magicool slim rad, 280mm Alphacool rad, D5 Vario pump, 1/4 ID 3/4 OD tubing, Noctua Redux 140/120mm fans. PSU: Evga 750w G2 SSD: Samsung 850 Pro 256GB & Seagate SSHD 2TB Audio: Sennheiser HD558s, JBL! speakers, Fiio E10k DAC/Amp Monitor: Xstar DP2710LED @ 96hz (Korean Monitor) Case: Fractal Node 804

Link to comment
Share on other sites

Link to post
Share on other sites

Disable secure boot if you haven't already.

is that in the bios or mint?

I don't always have network problems, but when I do-

Link to comment
Share on other sites

Link to post
Share on other sites

is that in the bios or mint?

That's a BIOS setting. Also try legacy mode if disabling secure boot isn't enough.

CPU: 5820k 4.5Ghz 1.28v, RAM: 16GB Crucial 2400mhz, Motherboard: Evga X99 Micro, Graphics Card: GTX 780, Water Cooling: EK Acetal CPU/GPU blocks,


240mm Magicool slim rad, 280mm Alphacool rad, D5 Vario pump, 1/4 ID 3/4 OD tubing, Noctua Redux 140/120mm fans. PSU: Evga 750w G2 SSD: Samsung 850 Pro 256GB & Seagate SSHD 2TB Audio: Sennheiser HD558s, JBL! speakers, Fiio E10k DAC/Amp Monitor: Xstar DP2710LED @ 96hz (Korean Monitor) Case: Fractal Node 804

Link to comment
Share on other sites

Link to post
Share on other sites

So I just finished my first build and I'm trying to boot Linux mint 15 cinnamon using a disk. It boots up normally then a slowly brightening mint logo appears but then it goes to a black screen and says  BuzyBox V1.20.2 (Ubuntu 1:1.20.0-8ubuntu1) built-in shell (ash)

Enter 'help' for a list of built in commands.

 

(initramfs) unable to find a medium containing a live file system. Can anyone help?

 

Did you have any luck?

Link to comment
Share on other sites

Link to post
Share on other sites

Ok so I have been trying a bunch of 64bit versions of Linux. Then I try ubuntu 10.4 32bit and that worked. I thought I had a 64bit pc but apparently not... thanks for the input everyone!

I don't always have network problems, but when I do-

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×