how big are front panel bays

[aries757]

so i am going to make an custom desk, how big are front panel bays (cd drive, etc.)

[manikyath]

so.. i selected your title, pressed right click, and clicked 'search on google'

 

second result: https://en.wikipedia.org/wiki/Drive_bay

Quote

Full-height bays were found in old PCs in the early to mid-1980s. They were 3.25″ high by 5.75″ wide, and up to 8″ deep (83 mm × 146 mm × 203 mm), used mainly for hard disk drives and floppy disk drives. Half-heightdrive bays are 1.625″ high by 5.75″ wide (41.3 mm × 146.1 mm), and are the standard housing for CD and DVD drives in modern computers, but were sometimes used for other things, including hard disk drives and floppy disk drives in the past. As the name indicates, two half-height devices can fit in one full-height bay. Often represented as 5.25-inch, these floppy disk drives are obsolete.

or more specificly:

Quote

1.625″ high by 5.75″ wide (41.3 mm × 146.1 mm)

 

 

due to forum standards i cant tell you to google it, but PLEASE, do some effort before asking people for information that's widely available.

[aries757]

11 hours ago, manikyath said:

so.. i selected your title, pressed right click, and clicked 'search on google'

 

second result: https://en.wikipedia.org/wiki/Drive_bay

or more specificly:

 

 

due to forum standards i cant tell you to google it, but PLEASE, do some effort before asking people for information that's widely available.

ok, sorry i was asking question i had, i been busy getting all the measurements i need, 

[aries757]

12 hours ago, manikyath said:

so.. i selected your title, pressed right click, and clicked 'search on google'

 

second result: https://en.wikipedia.org/wiki/Drive_bay

or more specificly:

 

 

due to forum standards i cant tell you to google it, but PLEASE, do some effort before asking people for information that's widely available.

ty