H440 Case Fans?

[Guest SDJlegion]

Hi,

Recently I was cleaning my PC and changed the PSU. In that process I disconnected some cables on the side of the case. This stopped my case fans working. Picture 3 shows the hub of all these connectors (the one at the bottom facing down is the one I took off. I also disconnected something from the PSU which it went into). Pictureso 1 and 2 is the cable I have from it. I'm not sure what goes where! The cable has 1 molex, 1 2 pin connector and 1 3 pin connector. Can someone tell me what to do? Thanks.

[2FA]

The 3 pin connector goes to the vertical header on the hub. The 2 pin goes to the logo lighting in the bottom I believe.

[Guest SDJlegion]

4 minutes ago, DeadEyePsycho said:

The 3 pin connector goes to the vertical header on the hub. The 2 pin goes to the logo lighting in the bottom I believe.

What about the big 1? My psu has no slot for that

[2FA]

That's a molex connector that provides power for the lights and fans. Your 

psu should have the male end. The one in the picture is the female.

[Guest SDJlegion]

4 minutes ago, DeadEyePsycho said:

That's a molex connector that provides power for the lights and fans. Your 

psu should have the male end. The one in the picture is the female.

It doesn't have a male end, but I have an adapter that let's me put it in the the slot where the SATA goes

 

[2FA]

5 minutes ago, SDJlegion said:

It doesn't have a male end, but I have an adapter that let's me put it in the the slot where the SATA goes

 

Adapters will work

[Guest SDJlegion]

2 minutes ago, DeadEyePsycho said:

Adapters will work

Thanks so much for the help dude, got it up and running